20 Most Recent Copystar CS-2030 Copier Questions & Answers


use the new mac driver for any black and white machine it will work. the new driver i think is 3.0.
www.copystar.com

I’m happy to help further over the phone at https://www.6ya.com/expert/mustafa_06f84c65ab5cc745

Copystar CS-2030... | Answered on Jul 23, 2017


Only copiers fitted with a duplexing unit will automatically make a double sided copy. I assume yours does not have this accessory.
You can always make two sided copies manually. You need to first work out the paper path, so mark one piece of paper with an arrow showing the top and the direction the sheet was placed on top of the paper feed tray. Make a copy and you will now know whether the top or bottom of the paper as loaded gets printed on. Now place that sheet back in the paper feed tray again with the arrow face down in the paper tray, but still pointing in the same direction as before. Print side two and you will now have a double sided copy. If the reverse of the copy is facing the wrong way then you know that the paper needs to go into teh paper tray with the arrow facing you. Hope this makes sense, but it just needs a couple of trial runs to get to understand which was round to put the paper back in for the revers side to be printed. Always keep the final successful double sided copy, marked up for future reference, as it is so easy to forget which way to put the paper back in several weeks later.

Copystar CS-2030... | Answered on Nov 02, 2015


Call a local service company and they can replace the needed parts and reset the message

Copystar CS-2030... | Answered on Oct 26, 2014


as i said, buy a cartridge

Copystar CS-2030... | Answered on Jun 06, 2014


if you are trying to clear the service/maintenance counter press 10871087 which will enter service mode type 251 and select clear using up/down keys then the start button. this will clear your maintenance counter. hit stop key 2 times the up arrow to 001 and start key. this will restart the machine. hope this is what you were looking for.

Copystar CS-2030... | Answered on Apr 21, 2013


http://techbravo.net/sharpftp/2030-errors.pdf

Copystar CS-2030... | Answered on Jan 30, 2013


C710 Toner sensor problem
• The sensor output voltage is outside
the range of 0.5 to 4.5 V during toner control.
• The toner sensor control voltage cannot be set within the setting range when maintenance item U130 is run.

Try removing and refitting drum and toner.
if this does not help you may have damaged your toner cartridge or the sensor

Copystar CS-2030... | Answered on Nov 19, 2012


perform developer calibration... go to SP mode 05-0 start

Copystar CS-2030... | Answered on Nov 25, 2011


Don't panic ! the copier has just reached the number of copies to display the message. There are parts inside that are only good for so many pages. Depending on what has reached the number it might mean slightly degraded copies or it will rub out of toner or perhaps a waste toner storage is full.
Basically the only time it is a emergency is when smoke is coming out of these.

Copystar CS-2030... | Answered on Sep 15, 2011


What??????????

Copystar CS-2030... | Answered on Aug 20, 2011


run 10871087 the press 130 then START it will start from count 10 to till it shows gud. thats it

Copystar CS-2030... | Answered on Aug 20, 2011


Waste toner reservoir overflow

problem (when the total number of

copies is 100 thousand sheets or

more)

• After E31 is displayed, 1,000 sheets

are copied. Or waste toner exceeds
5 g.

Defective waste

toner sensor or
engine PWB.

Shake the process unit from side to side

and turn the power switch off and then on.

If the problem cannot be solved, replace

the process unit.

After replacing the process unit, turn the

power switch off and then on. If the problem

cannot be solved, replace the waste
toner sensor or the engine PWB.

Copystar CS-2030... | Answered on Apr 05, 2011


The fuser (hot rollers) fingers may be broken or bent. Try feeding the paper from a different paper cassette also. Good luck.

Copystar CS-2030... | Answered on Feb 26, 2011


Press 1087 1087 until machine shows U000. enter 163 press start. scroll to execute then press seart

Copystar CS-2030... | Answered on Feb 25, 2011

Not finding what you are looking for?
Copystar CS-2030 Copier Logo

79 questions posted

Ask a Question

Usually answered in minutes!

Top Copystar Office Equipment & Supplies Experts

CheckitRight
CheckitRight

Level 3 Expert

1363 Answers

Tammie Duggan
Tammie Duggan

Level 2 Expert

57 Answers

Tareq Bin Mostaq...
Tareq Bin Mostaq...

Level 3 Expert

1449 Answers

Are you a Copystar Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Copystar Office Equipment & Supplies

  • Copystar Office Equipment & Supplies

Most Popular Question

all error code list

  • Office Equipment & Supplies
Loading...