20 Most Recent
Questions & Answers
I have the same trouble, and i did what u said and
hi krol, shut down the system , unplug it for at least for 30 seconds , unplug the hard drive from the main board , (if you have two or more need to be unpluged all ) reconnect them and start it the system , it should work, it worked for me.good luck. t.saeed
on Sep 17, 2012
Channel 3/Camera 3 not displaying properly
try swapping the cam inputs first to rule out the unit, if not the camera may be faulty or needs setting up properly with a focus adapter, or the lens could need setting up!
when CCTV company's set up these systems they have all the equipment to plug in and focus auomatically etc..
Hope this helps!
Try looking at www.digitalvideos.co.uk
(test equipment) section.
on Sep 22, 2009
Lorex dvr beeping
NORMAL ON POWER UP , IT;S TELLING YOU POWER HAS BEEN CYCLED AND OPERATOR NEEDS TO CK THAT SYSTEM HAS RESTORED CORRECTLY ,USE MOUSE TO CLICK BELL ON BOTTOM EDGE OF HOME SCREEN TO CANCEL BEEP !
on Mar 21, 2019
Not finding what you are looking for?