20 Most Recent RCA Universal Remote Control Transmitter DVD-AUX, SAT-Cable-DTC, VCR, TV Silver Questions & Answers


Code search. Hold down code search button until on-off light flashes then stays lit. keep pressing the on-off button until the power to your tv goes off, then hit the enter button. your remote should be set to your tv!

RCA Universal... | Answered on May 18, 2014

Tip

How to: code search


Hold down the code search button until the light above the on-off button flashes and then stays lit. Repeatedly press the on-off button until your t.v. powers off. When power to your t.v. turns off press the enter button. You have successfully set your remote control to your t.v.

on May 18, 2014 | RCA Universal Remote Control...


Check the remote control for its infrared emission. Check it with fresh batteries. If you wish to get more details about how to check a remote control, please visit this site. One among the posts has details about it. Surf the site with patience.
http://electronicshelponline.blogspot.com/

RCA Televison &... | Answered 2 days ago


Fault with the main power supply regulator board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.
http://electronicshelponline.blogspot.com/
It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.

RCA Televison &... | Answered 2 days ago


In general the TV is not receiving any input. The fact that you lost HDMI and VGA earlier suggests that there is a breakdown in the input circuits.
Best guess, replace the main board. Symptom doesn't seem to indicate Power supply or TCon board
https://www.a2zelectronicparts.com/products/view/82546

RCA Televison &... | Answered on Nov 09, 2019


I suspect that when adding your audio cables you may have bumped another cable loose. If you look and don't see a loose connection, one thing that has helped me in the past is to just remove ALL cables completely (that means both sides of all cables from all devices) and and slowly connect one device at a time, checking that the newly added device functions properly before proceeding to the next device.
Good luck

RCA Televison &... | Answered on Nov 07, 2019


I'm not sure what you mean by large black shadow, but it may be your screen that is failing. Ask friends for a honest repair person to look t it and tell you what they think the problem is. I wish I could tell you more,m but a large black shadow is not one of the symptoms I ever heard of.

RCA Televison &... | Answered on Nov 02, 2019


A slightly different model, but the only manual available online. I read one article that said it didn't come with a manual!

https://www.manualslib.com/manual/555747/Rca-Rtd3136.html

RCA Televison &... | Answered on Oct 27, 2019

Not finding what you are looking for?
RCA Universal Remote Control Transmitter DVD-AUX, SAT-Cable-DTC, VCR, TV Silver Logo

3 questions posted

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76171 Answers

matt martin
matt martin

Level 3 Expert

1257 Answers

Cindy Wells

Level 3 Expert

6046 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

RCA Televison & Video

  • RCA Televison & Video

Most Popular Question

program universal remote model 6420ff

  • Televison & Video
Loading...