20 Most Recent
Questions & Answers
Please let me know if the speaker output fuses on
If you have the original fuses you might be able to tell from that. For example are there remains of a coil? If so it's a slow blow.
However you can fit fast blow in there, it should work normally with that. If it blows again it will be an short in a semi-conductor that causes it not the fuse type.
on Feb 24, 2012
Where can I get a fuse for my Krell KSA 300 amplifier.I had a blown fuse on the left channel.
Fuses rarely go on their own. The cause is likely to be a shorted semiconductor device in the left channel output.
Fuses are generally not specific to any brand. Is the fuse a tube with metal ends? If it is measure the length in MM. Then look at the end and you should see the rating. Either in A for Amps or MA for milliamps.
Any electronic parts supplier should have the one you want in stock. Buy several, for if the part I mentioned has gone, it will blow again.
on Sep 16, 2016
Left channel of my KAV
this may not be a fuse. this may be the rectifier circuit in the power supply. A schematic will tell the voltages and surrounding components and their values. if you are not electronically capable of this repair then I suggest that you take the unit to a electronics tech to troubleshoot the unit properly with the right tools to determine the cause of no output.
Sears Repair is a good source for electronic repair.
I hope this helps. Have good day.
on Aug 16, 2010
Not finding what you are looking for?