20 Most Recent Denon 3991095008 Rc1068 Remote Avr4308ci3808ci 5Channel Amplifier Questions & Answers

If i turn the power on , it switch off by it self

The set powers off because there is a cut off by the error amp which controls the main relay to switch off for safety from burning out any circuits. It could be failure of the output drive/ the short in the speakers or failure of the error amp section. It is tricky to find out the actual fault because you will have to keep testing by elimination, disconnect power output section, preamp section, and check if this releases the power switching.. Helpful? Good day

Denon 3991095008... | Answered on Jul 14, 2010

1 Answer

Denon AVC 3530 manual

https://searchmanuals.net/search94-sh/?keyword=%2Bdenon+%2Bmanuals&msclkid=7df6682623ae12d6f4d035cf55d9e058

Denon Audio... | Answered on Dec 05, 2019

1 Answer

I have a denon April s470h receiver and was listening to it today on a low volume when all of a sudden the volume went to the max. Turned it off by the remote and a minute later the receiver turned back on at full volume, had to unplug. Has anyone had this problem?

usually happens if there is a stuck button. Could also be a component like a capacitor failing.

Denon Audio... | Answered on Nov 21, 2019

0 Answers

Want to clean head on Denon DRR-M30 - is it easier to remove casing?

Denon Audio... | Posted on Nov 06, 2019 | Be the first to answer

1 Answer

Hi! How do connect an equalizer to my Denon AVR-1803?

I find the best way to connect any equalizer is to connect via the tape monitor sockets, assuming that the AVR has one. From the equalizer in and out sockets - connect the Eq OUT to Tape IN on the AVR. And Eq IN to Tape OUT on the AVR.
Some AVR don't allow connections, due the equalizer interfering with Surround Sound systems. If you can connect switch off the equalizer when listening to Dolby or other surround formats, as it will spoil the sound.

Denon Audio... | Answered on Oct 12, 2019

1 Answer

My Denon avr 1709 was working perfectly. Then I muted it and then there was no more sound coming out of the speakers and I can’t get the system set up to show up any more. What do you think is wrong?

Have you tried a system reset?

http://www.fixya.com/support/t25633372-reset_denon_avr_1709

Denon Audio... | Answered on Oct 12, 2019

0 Answers

Denon avr 800 protect error

Denon Audio... | Posted on Oct 10, 2019 | Be the first to answer

2 Answers

Standby lite goes green when turned on no sound, no display. denon avr 1905 rec.

https://www.manualslib.com/manual/38357/Denon-Avr-1905.html
++

Denon Audio... | Answered on Oct 06, 2019

0 Answers

On a CDR-W-1500 Denon, I keep getting a message "OPC FULL".

Denon Audio... | Posted on Sep 29, 2019 | Be the first to answer

1 Answer

A manual for denon al24 processing

Google (denon)(al24)(manual) without parens OR contact Denon directly with your request.

Denon Audio... | Answered on Sep 28, 2019

1 Answer

How can i turn on a denon avr 700-rd when on standby without remote?

Hold together VIDEO SELECT and TUNER button while OFF and push button to ON.

Denon Audio... | Answered on Sep 23, 2019

1 Answer

I have a Denon DRA-350 tuner amp. It powers up but has no sound. Any ideas?

Hi Ray Lynam, for what you say, you could have a problem with the speaker output
I suggest you remove the cover and look for two F2 and F3 fuses of 4Amp each that correspond to the output of the speakers, check if they are burned, if so replace them, ONLY FOR FUSES OF EQUAL VALUE 4AMP, do not put more value because you could produce major damage, test the equipment and if they burn again, then if you have problems at the exit stage
In this case, look for a specialized technical service
I hope you can solve the problem
Greetings Franco Dosil

Hola Ray Lynam, por lo que comentas, podr?as tener problema en la salida de parlantes
Te sugiero retirar la tapa y buscar dos fusibles F2 y F3 de 4 Amp cada uno que corresponden a la salida de parlantes, controla si est?n quemados, si es asi reemplazalos, SOLO POR FUSIBLES DE IGUAL VALOR 4 AMP, no pongas de mayor valor porque podr?as producir un da?o mayor, prueba el equipo y si se vuelven a quemar, entonces si tiene problemas en la etapa de salida
En este caso busca un servicio t?cnico especializado
Espero que puedas resolver el problema
Saludos Franco Dosil

https://www.hifiengine.com/manual_library/denon/dra-350.shtml

Denon Audio... | Answered on Sep 17, 2019

0 Answers

Denon avr 5805 starts up and emeadatly shuts doun

Denon Audio... | Posted on Sep 14, 2019 | Be the first to answer

1 Answer

Hi pressed a button on my Denon remote and have now lost sound out of 2 of my 5 speakers. Don't know what I pressed can you please help. Thank you

I would guess it's the Surround Sound mode button. Various modes in Surround Sound do not use all 5 speakers. Often the button pressed repeatedly changes between the modes. So if you press it again it might restore the sound mode to the one you had. I can't be more specific as you did not give the model number.
You could try the Denon website to see if they have a free PDF of the user manual, if you have lost it. You will need the model number for that though.

Denon Audio... | Answered on Jul 22, 2019

1 Answer

Won't power on.

Try unplugging it. Another thing is some units have a fuse in the back. Check the fuse with a multimeter for continuity. If meter shows OL then replace the fuse.

Denon Audio... | Answered on Jul 15, 2019

0 Answers

DENON 1705/685 FAST BLINKING LIGHT , NO SOUND RECEIVER GOT HOT....IS THIS A RELAY?

Denon Audio... | Posted on Jul 09, 2019 | Be the first to answer

0 Answers

I have denon AVR 3310 but when I turn on some seconds it turns. The red indicator blinks, what might be the problem?

(1)Download AVR3310 service manual.
(2)enter debug mode to see what kind of protect it belongs to.
(3)DC or ASO protect
(4)DC protect to check all smd transistors if leakage occurs or
differential and voltage amp transistors leakage
(5)ASO see service nanual troubleshooting steps.
(6)Replace all defective components.

Denon Audio... | Answered on Jun 24, 2019