20 Most Recent Bertazzoni K30 PRO X 30" Kitchen Hood Questions & Answers

As a general rule, the size and shape of the bulb will determine the wattage. Match it up with ones in the store, the value can be slightly higher or lower but it will still work just fine. Halogen bulbs burn out much quicker if you handle them without gloves or tissues. The oil from your fingers will cause them to burn out faster.

Bertazzoni K30... | Answered on Sep 04, 2014

Must be no greater than 30 watts. As it is a standard oven bulb I suggest you just remove the current one and bring it to a local hardware store.

Bertazzoni K30... | Answered on Jul 31, 2014

First remove cover to access the bulb, pull bulb straight down being careful not to break it. to replace w/new bulb, remove bulb from package, be sure to use a cloth or some type of glove so as not to get oils from your fingers on the new bulb as this will create a hot spot on the new bulb and shorten the life of the bulb. Install the new bulb by inserting into the fixture by gently pushing the bulb into socket.

Hope this helps

Bertazzoni K30... | Answered on Apr 19, 2014


In the base of the lamp holder you will see the center contact. It is spring loaded to make contact with the light bulb. Turn off the breaker or unplug the oven, then reach in the lamp holder with a small screwdriver and pry the center contact up a bit. It won't take a lot. Then try a new bulb and see if it works. You might try a heavy duty bulb or one rated for 130V instead of 120V. They probably will last longer.

If your range hood fan does not turn on at all, do the following:

First and foremost, if turning on the switch does not turn on the range hood fan, check that your circuit breaker is turned to "on," and if need be, replace any burned out circuit breaker fuse .

If the above does not work, remove the fasteners (e.g., screws) from the cover of the range hood fan and take off the cover to gain access to the interior thereof, using either a screwdriver or other fastener device that is more appropriate.

As a precaution, use a voltage meter to make sure that the wires connected to the fan are not live (have no power running through them). (You should have disconnected the power to the fan from the circuit breaker long ago, if you haven't done so already.)

Having a clear view of the range hood fan; disconnect any cord from it and remove it, using a screwdriver or other fastener device that is more appropriate. (Most fans do not require the need for dealing with any electrical wires in order to replace a fan motor. In fact, most fan motors simply are inserted into a receptacle within the fan housing and removed just as easily.)

Take the removed range hood fan motor to either a home improvement store or appliance parts store (or even shop online) in order to get the correct range hood fan replacement.

Install the new fan motor replacement just as you saw the old one installed. In almost all instances, this just involves the act of the inserting the fan motor replacement into its designated receptacle within the fan housing.

Finally, put the cover of the range hood fan back into place by securing it with the fasteners (e.g., screws) that originally were removed to provide access for the aforesaid installation.Restore the power, and the range hood fan should then be working normally as it once did.

Please get back to us if you have further query else please accept this particular suggestion.

Thanks for contacting fixya.com

Bertazzoni K30... | Answered on Aug 24, 2011

It's my understanding that when the range encounters an error, it flashed "E" and then the error code. As this occurs E as your turning it off, and not followed by an error code, it mat be a fluke in the design. I'd ask the dealer where you bought it, but if everythng is functioning normally, it's probably nothing of concern.

Bertazzoni... | Answered on Jun 17, 2019

Hi Royce, for the oven temperature issue try to find the owners manual,it will give you information on how to offset the temperature setting so what you set is what you get. Now for the broiler, if it's an electronic ignition (goes click,click,click) the flame sensor might be bad or damaged. In either case call the store you bought it from or the factory authorized service provider. If it's only a month old it will be under warranty. Hope that helps.

Bertazzoni... | Answered on Feb 23, 2019

In my case, the igniting wire was too close to another piece of metal. It was igniting upstream from the burner. All I did was push up on the wire, and the broiler started working again!

Bertazzoni... | Answered on Dec 19, 2017

Bertazzoni X366GGVX Stainless Steel Gas Range Remove ...

www.fixya.com > ... > Bertazzoni X366GGVX Stainless Steel Gas Range
Bertazzoni X366GGVX Stainless Steel Gas Range"remove oven door" Questions. Question about Frigidaire Kitchen Ranges. 1 Answer ..

Bertazzoni... | Answered on Oct 04, 2015

Sounds like your switch has gone on the oven.
What oven model make would help.
If its digital it will be expensive.
So much for technology give me an old fashioned manual oven, car , tv anyday...

Bertazzoni... | Answered on Oct 16, 2014

Not finding what you are looking for?
Bertazzoni K30 PRO X 30" Kitchen Hood Logo

5 questions posted

Ask a Question

Usually answered in minutes!

Top Bertazzoni Kitchen Ranges Experts

Dan Connors
Dan Connors

Level 2 Expert

119 Answers


Level 1 Expert

33 Answers

Todd B

Level 3 Expert

572 Answers

Are you a Bertazzoni Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Bertazzoni Kitchen Ranges

  • Bertazzoni Kitchen Ranges

Most Popular Question

wattage halogen lights hood two lights

  • Kitchen Ranges