20 Most Recent Angelcare Baby Movement and Sound Monitor Delux Plus Blue Questions & Answers


hi,

please tell me how to pair AC1100 the nursery and parent units

please for help..

best regards to all

Angelcare Baby... | Answered on Jul 04, 2012


turn both the nursery and parent units off.

turn on the parent unit.

hold menu for 5 secs until it beeps.

turn on the nursery unit.

press and hold the little round blue light at the top for about 5 second until it beeps.

the parent unit waits for the signal then pairs.

Angelcare Baby... | Answered on Feb 10, 2011


I have the same problem. I'm guessing mine is broken and will need to be replaced. However i did read a possible solution on a site with slightly different instructions to the ones in the box that describes how to pair the two devices together.

turn both the nursery and parent units off.
turn on the parent unit.
hold menu for 5 secs until it beeps.
turn on the nursery unit.
the parent unit waits for the signal then pairs.

if the nursery unit just waits 20 seconds then beep beep beeps and turns off i guess yours is broken too. I think its probably the nursery unit has stopped transmitting.

they will replace or repair a unit that less than 12 months from date of purchase with a supporting receipt.

the help line is 0845 009 1789 mon-fri 11-3pm

Angelcare Baby... | Answered on Feb 10, 2011


There are two options: There is athree way switch on the back of the base. switch to `sound only``.
Or you can disconect the sensor`s cord from the base

Angelcare Baby... | Answered on Nov 26, 2010


bin it or have someone that repairs chairs look at it

Baby Gear | Answered on Feb 15, 2020


You can get everything off by following the instructions in the manual except the front bar holding on the cloth seat. If you look underneath you will see three white plastic rectangular tabs. Note that the holes are the same size as the plastic tabs, if you could turn the plastic tabs. They are all connected to each other by a 12” strip hidden inside the cloth. The trick is to go halfway between the center tab and one of the other tabs and put your finger between the plastic support structure and the 12” plastic strip. By gently pulling that out you can grasp the plastic strip. While holding that side out, go between the center tab and the other tab and do the same. With hands on both sides of center, you can easily rotate the center of the strip about 45° counterclockwise and the center tab will release. The other two tabs need to be rotated 90° then they will come out also. Wash and then reinstall. Hope this helps!

Baby Gear | Answered on Feb 10, 2020


Toddler beds are available everywhere. If you don't want to spend too much you can buy a regular toddler bed and then use the duvet sets to bring color and themes to the bed. But if you want to splash out, you could go for a really girlie themed bed. Toys'r'us have some good products. http://www.toysrus.com/family/index.jsp?categoryId=2256286 Just remember that if your next child isn't a girl, you will be stuck with a very pink bed!!

Baby Gear | Answered on Feb 09, 2020

Not finding what you are looking for?
Angelcare Baby Movement and Sound Monitor Delux Plus Blue Logo

13 questions posted

Ask a Question

Usually answered in minutes!

Top Angelcare Baby Gear Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

Paul Carew

Level 3 Expert

3490 Answers

john h

Level 3 Expert

22486 Answers

Are you an Angelcare Baby Gear Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Angelcare Baby Gear

  • Angelcare Baby Gear

Most Popular Question

request information about angel care

  • Baby Gear
Loading...