20 Most Recent Toshiba e-Studio 350 Copier Questions & Answers


business.toshiba.com You'll be able to find your drivers there. However, if you don't have a print or print/scan dongle (activator) on your machine, network printing will not work.

Toshiba e-Studio... | Answered on Sep 16, 2019


If moter is working, check drum unit, heating unit, paper feeding clutch, paper exit scencer.

Toshiba e-Studio... | Answered on Sep 16, 2019


Make sure the front cover is closed firmly, triggered the front switch, u can see clearly by removing the paper exit tray.
It might be front cover switch problem also.

Toshiba e-Studio... | Answered on May 31, 2019


F105 indicates HDD other error

Perform the bad sector check (08-694). If the check result is OK, recover the data in the HDD. If the check result is failed, replace the HDD.


Toshiba e-Studio... | Answered on Apr 05, 2019


I think the cable is not connected properly on the developer unit...Open front cover, take out the waste toner box, and u will see the connector.

Toshiba e-Studio... | Answered on Jan 27, 2019


Hello,

You can try switching the machine off hold few minutes till the machine beeps push 400 set the value of zero and restart the machine. If it is not work then change the thermisters.

Toshiba e-Studio... | Answered on Dec 25, 2018


There are many possibles that can cause "Close Front Cover"
Check the front cover actuator, switch. If all covers, switches is working fine, probably power supply is faulty.

Toshiba e-Studio... | Answered on Dec 20, 2018


Communication error between System-CPU and
Scanner-CPU

Check if the harness connecting the SYS board and SLG board is disconnected or open circuited.
Replace the SYS board. Replace the SLG board.

Toshiba e-Studio... | Answered on Jul 03, 2018


this is set by the computers driver

or its detecting no paper in the main drawers

Toshiba e-Studio... | Answered on Jun 07, 2018


which model do u want to reset admin password?

Toshiba e-Studio... | Answered on Feb 18, 2018


Press User Functions>Admin>then enter 123456 (password) then go to the TCP/IP section and clear all the IP addresse/s out of the fields then hit enter.

Press Back>Back>Copy>User Functions>Shutdown. then turn the machine back on.

Toshiba e-Studio... | Answered on Nov 14, 2017


After replace new hdd, perform 3C format loader and create partition, update firmware

Toshiba e-Studio... | Answered on Sep 10, 2017


CDF0 is offset tray error on the exit unit, mostly due to the offset motor problem

Toshiba e-Studio... | Answered on Sep 09, 2017


First of all check what is sub code with this .if it is not showing code press clear & 8 key at same time .code will bi shown .if no code just reset pm cycle count.MIAN AKHLAQ

Toshiba e-Studio... | Answered on Aug 02, 2017


CDF0 indicates Initialize error of the offeset tray.
Check the connectors of the offset gate motor, MOT2,

Toshiba e-Studio... | Answered on May 17, 2017

Not finding what you are looking for?
Toshiba e-Studio 350 Copier Logo

523 questions posted

Ask a Question

Usually answered in minutes!

Top Toshiba Office Equipment & Supplies Experts

didi2005

Level 3 Expert

727 Answers

jasbo
jasbo

Level 3 Expert

2239 Answers

CheckitRight
CheckitRight

Level 3 Expert

1363 Answers

Are you a Toshiba Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Toshiba Office Equipment & Supplies

  • Toshiba Office Equipment & Supplies

Most Popular Question

call service

  • Office Equipment & Supplies
Loading...