20 Most Recent Cisco Linksys E1000 WirelessN Broadband Router Network Routers - Page 8 Questions & Answers


In order to get your router back to the original settings, you must push in the reset button (usually on the back of the router) for somewhere between 10 and 30 seconds depending on the router. You may need a pin or something small to push in the button, because it can be recessed. Once you have reset the router, the username and password will be changed to the defaults, admin and password, respectively. One thing you must remember is that resetting the router will change all of the router settings back to the factory settings. This means you will lose all of the changes you made since you got the router. Make sure to write down any things you've changed, so you can change them back after the reset. Also, I recommend updating to the latest firmware after the reset.
If you need more help post back! Thumbs and testimonial are welcome!

Cisco Linksys... | Answered on Jan 18, 2011


There is a great article at Working with Windows Wireless Networks
If you need more help post back! Thumbs and testimonial are welcome!

Cisco Linksys... | Answered on Jan 18, 2011


If your OS is Windows there is a good tutorial at -> Working with Widows Wireless Networks

That can help you out to configure your wireless networks.

If you need more help post back!
Thumbs and testimonial are welcome!

Cisco Linksys... | Answered on Jan 17, 2011


First you have to access the router through web browser (Internet Explorer) by typing the IP address of your router in the address bar, which is usually 192.168.1.1 or 192.168.0.1 (written at the back of router and lookup for the options to do the following: -
1. Change the SSID (Name) of the router
2. Change the default administrative user name and password (unless you've configured otherwise, the default username is admin and the password password.)
(The above step would prevent unauthorized access to your router)

Next step is to secure it:
1. Go to "Wireless Settings" and "Security Options", select your desired encryption method (preferably WPA2-PSK)
3.Choose a Network Key - it can be anything, as long as it's 8-63 characters in length
4. Click Apply

Now your router and your connection would become secure and the user has to provide the network key to access the internet.

Feel free to contract me for further assistance

CreativeTECH

Cisco Linksys... | Answered on Jan 12, 2011


It is looking for a NetWork Key or password that was set up when your router was installed. That network key protects your network from some one else connecting to your network. You can reset your router where it will forget that network key and when you start it back up it will be an open network not needng a password, but you are going to have to learn how to enter your router's set uo menu and replace that factory setting with another key. Take a look at:

http://www.linksysbycisco.com/UK/en/support/E1000/download and down load what ever you need. You also should read the manual, you can down load if you want to.

Cisco Linksys... | Answered on Jan 11, 2011


have you tried uninstalling it and then reinstalling it

Cisco Linksys... | Answered on Jan 10, 2011


log into the router 192.168.1.1 username blank and password admin if default
click wireless/wireless security and double check make sure you use zero not the o button

Cisco Linksys... | Answered on Jan 07, 2011


Hi,

Click on the link below and download the tool to find out your WPA.
Read the instructions on the Download page to know how the tool works
HP Network Diagnostic Tool

After you have downloaded and installed, open the HP Diagnostic Network tool and click on Advanced Tool - Click Retrieve WEP/WPA and click Show.



* Please rate this solution with Thumbs up and Testimony to help us improve providing support

Cisco Linksys... | Answered on Jan 05, 2011


The defaults are a blank user name, and the password is "admin." The IP address is 192.168.1.1 which should give you the logon screen.

Resetting is the only real option for you, but setting up using the web interface is not that difficult, especially if you have done it before.

Hope that's helpful.

Cisco Linksys... | Answered on Dec 31, 2010


if you're running windows 7 sometimes it tries to auto detect the type of network but doesn't ask for a password, when it starts to try to auto detect hit cancel and enter in the password manually.

If you need further help, reach me via phone at https://www.6ya.com/expert/joel_63c670a84e9f6a97

Cisco Linksys... | Answered on Dec 31, 2010


If you cant find the password or remember it you'll have to do a hard reset on your router.

You can do a hard reset by plugging it in, locating the small hole on the bottom or side with possiblitly the words reset next to it. Insert a pin for about 10-20 seconds and the device should revert to the default settings.

You can then set up a new SSID and password.


A tip to help me remember is to write the password down and tape it to the bottom of my wifi router.

Enjoy your Kindle.

Cisco Linksys... | Answered on Dec 29, 2010


Hi there,

Type 192.168.1.1 on the address bar of your web browser

Now you will be prompted for login details.

holygrass_12.png
Enter login details of Wireless N Router

User Name: (it should be blank)
Password : admin

After entering the details click OK. Now you will be in on the web based setup page of Linksys E1000 Wireless N Router. Click on wireless tab on top as shown in the picture tgere you would see your password.
holygrass_11.jpg

Hope this helps you.

Cisco Linksys... | Answered on Dec 26, 2010


Reset your router to factory, and install software from scratch... I need more details to help you more then this?

http://homesupport.cisco.com/en-us/wireless/linksys/E1000

Cisco Linksys... | Answered on Dec 22, 2010


Hello

The 2 links below should be of help.

Link 1
Link 2

Please feel free to let me know if you need any further assistance.

Kind regards
Andrea

Cisco Linksys... | Answered on Dec 21, 2010



Follow the steps on how to set the WPA2, then you will see your existing key:

http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=cfb50c0dc992443ab2405a782cca60f7_19073.xml&pid=80&respid=0&snid=15&dispid=0&cpage=search


Click on this link or copy and paste the complete link into your browser.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response. Happy Holidays!

Thanks, Joe



I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

Cisco Linksys... | Answered on Dec 15, 2010


Hi there,

Try not use a modem when you have a Router,Connect the ADSL cable Directly from the Spliter to the Router and try using it.

Router does the same thing which modem does but wi-fi connectivity is found in routers.

Cisco Linksys... | Answered on Nov 27, 2010


it says it doesn't recognize the router .. try to connect the wire that connects to the router and plug it back again .. then try to open 192.168.1.1

Cisco Linksys... | Answered on Nov 24, 2010

Not finding what you are looking for?
Cisco Linksys E1000 WirelessN Broadband Router Network Routers Logo

226 questions posted

Ask a Question

Usually answered in minutes!

Top Cisco Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2277 Answers

Ekse

Level 3 Expert

13434 Answers

Jeffrey Groves
Jeffrey Groves

Level 3 Expert

573 Answers

Are you a Cisco Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Cisco Computers & Internet

  • Cisco Computers & Internet

Most Popular Question

signs wireless router failure death

  • Computers & Internet
Loading...