20 Most Recent Xerox DocuColor 242-252-260 PS Questions & Answers


010-321 Fuser nip fail, usually after repair fuser unit, commonly we accidentally spoil the nip sensor.

Xerox DocuColor... | Answered on Nov 20, 2018


TROUBLESHOOTING
This chapter provides troubleshooting tips.
Troubleshooting the Fiery
Startup diagnostics are described in the documentation for service technicians. Contact your
authorized service/support center if you see error messages while Command WorkStation is
starting or if the Fiery does not reach the Idle state.
Runtime error messages
For error messages related to canceling jobs and printing, including the Disk Full message and
alerts to load media, see Command WorkStation Help.

For error messages related to the copier, see the documentation that accompanies your copier.
You can turn on PostScript error reporting as a print option from Mac OS applications.
Printer not found
Most failures to find a printer on the network are due to conflicting or missing name or
address settings for the Fiery. You must type names in specific places. The required names are:
•TCP/IP host name (also known as the DNS name), which is defined by your organization.
Type the host name as the Server Name in Fiery Setup.
•Remote printer (internal machine) name. Use one of the following:
print
hold
direct
NOTE: If you change the DNS name (also known as the TCP/IP host name) of the Fiery, you
must reconfigure one of the utilities on each workstation. http://swdownload.efi.com/ftpvefigs/9019710383/2822679259/9432346727/7795362481/Configuration.pdf

Xerox DocuColor... | Answered on Dec 22, 2017


The only way I know is to tell the machine to trim off 1/8 more of the cutting edge. This is none in the driver itself not the machine.

Xerox DocuColor... | Answered on Dec 22, 2017


Please do not keep re-posting, you can use the comment section.

Xerox DocuColor... | Answered on Dec 22, 2016


Fiery Webtools will not allow download

Xerox DocuColor... | Answered on Dec 15, 2016


Try clean the silver tape at back of the IBT Belt.

Xerox DocuColor... | Answered on Aug 30, 2016


This may be the error code for the piece that reads the image, i. e. the Lens CCD aka Charge Coupled Device. This is a light sensitive integrated circuit, i. e. a sensor. If the sensor has failed, you can't scan. That looks like a repair or replace the copier problem. It might be a problem with the Image Input Terminal, or you might try cleaning the glass or seeing if there is anything blocking the lens but at the end of the day, consultation with a Xerox tech is likely.

Xerox DocuColor... | Answered on Mar 05, 2016

Not finding what you are looking for?
Computers & Internet Logo

68 questions posted

Ask a Question

Usually answered in minutes!

Top Xerox Computers & Internet Experts

Jim LeVerso - IT...
Jim LeVerso - IT...

Level 2 Expert

149 Answers

Ching QP

Level 1 Expert

13 Answers

Tom Chichester

Level 3 Expert

54386 Answers

Are you a Xerox Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Xerox Computers & Internet

  • Xerox Computers & Internet

Most Popular Question

xerox 240 fiery displays ff

  • Computers & Internet
Loading...