Pioneer XVDV830/SDV830 DVD AUDIO HTP System - Page 9 - Answered Questions & Fixed issues


Try swapping everything external to the amp with another channel to see if it follows. Could be the speaker wire or the speaker. If it stays on the same output then it's time for a new amp.

Pioneer Audio... | Answered on Nov 20, 2017 | 115 views


Try Googling (Pioneer)(VSX-D906S)(manual) without parens to get instructions.

Pioneer Audio... | Answered on Nov 20, 2017 | 35 views


You need to buy a turntable pre-amp, as the signal output is much too low to drive an amplifier. Or buy a DJ mixer, which has a turntable preamp built in, as does any "integrated receiver" which is basically a tuner/phono preamp/amplifier combo in one box.

Pioneer Audio... | Answered on Nov 17, 2017 | 42 views


It's probably just a setting issue. Either on the TV or Receiver. You need to check that it is sending the right audio signals to your devices.

Pioneer Audio... | Answered on Nov 12, 2017 | 55 views


Check all the soldering joints inside the unit. It might have been damaged in the move.

Pioneer Audio... | Answered on Oct 18, 2017 | 52 views


@Michae Yokeum
"Rear Speakers on Pioneer VSX-401".

Hi Michae.
Wow, nice Hi-Fi!! :) :)

IF [manual_required] THEN
GOTO
https://www.pioneerelectronics.com/StaticFiles/Manuals/Home/VSX-01TXH_OperatingInstructions0523.pdf
ELSE

Check your SBch* setting which should be set to ON or AUTO.
*Speaker Back channels
More info on pg. 83 of manual.

PS - as this is a home hi-fi and not a car-radio, I've moved it from 'Cars & Trucks' to a new home 'Audio Players../Pioneer', where experts in that field can offer more help.

Pioneer Audio... | Answered on Oct 15, 2017 | 294 views


Try Googling (pioneer)(vsx-605s)(manual) without parens.

Pioneer Audio... | Answered on Oct 07, 2017 | 178 views


I don't have a stand-alone cd recorder but like many people I have burned discs on the computer and had many disappointments. While some disc drives are clearly better than others, for no apparent reason, there does seem to be more reject discs with some software than others.
Particularly disappointing is the Nero burning software that performs well when it is first installed but seems to deteriorate fairly quickly with every computer restart. I know nothing about such things so I am only guessing the cause might be that Nero displaces some Windows components and Windows seems to try repairing itself when booting.

Like most things these days, especially digital things, your cd recorder is in fact a computer that depends entirely on the software loaded into it, software that could degrade or become corrupted over time.
While it is possible the disc drive (laser perhaps) has become less potent it wouldn't be unreasonable to suspect the software and I suggest you contact Panasonic.
It is probable, like many things requiring software, early versions were found to have problems and would be periodically updated.

Pioneer Audio... | Answered on Sep 30, 2017 | 382 views


maybe it's a fuse that automatically turns it off, send it to a service

Pioneer Audio... | Answered on Sep 26, 2017 | 266 views


Try the pioneer web site or vintage audio web site for manual downloads.

Pioneer Audio... | Answered on Sep 19, 2017 | 51 views


This sounds like your receiver is in protection mode. This is often caused by a short circuit of some kind (e.g. speaker wire cores touching the chassis of the receiver).
Disconnect and reconnect all the connected cables one by one (begin with disconnecting the power cable and don't reconnect that until you're done with all the other cables).

Pioneer Audio... | Answered on Aug 26, 2017 | 622 views


It is there - it is a "c" clip that is wrapped around the base of the spindle. You have to pry it away from spindle with a small screw driver.

Pioneer Audio... | Answered on Aug 04, 2017 | 54 views


Could be an open internal fuse or power supply failure

Pioneer Audio... | Answered on Jul 29, 2017 | 31 views


The power supply may have failed.

Pioneer Audio... | Answered on Jul 22, 2017 | 46 views


Your toddler may have pressed the PAUSE button.

Pioneer Audio... | Answered on Jul 18, 2017 | 32 views


Request the schematic diagram you need directly from Pioneer.

Pioneer Audio... | Answered on Jul 02, 2017 | 286 views

Not finding what you are looking for?
Audio Players & Recorders Logo

Popular Tags

24 questions posted

Ask a Question

Usually answered in minutes!

Top Pioneer Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5699 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1176 Answers

Anthony

Level 2 Expert

227 Answers

Are you a Pioneer Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...