20 Most Recent OKI C5100n Laser Printer Questions & Answers

Fatal error 980 OKI C5500 printer

I had a paper jam and removed the jammed papers. The paper jam cleared and then the Fatal Error 980 appeared. OKI C5500 printer

OKI C5100n Laser... | Answered on Aug 17, 2018

1 Answer

Oki C5150n is printing only magenta. Very little traces of yellow, blue but no greens at all. Everything else is just magenta!

Since green is made of blue and yellow, I suspect you need a new yellow toner cartridge.

OKI C5100n Laser... | Answered on Jan 25, 2018

1 Answer

Errors poped up after routine cleaning of C5100N

Greg,

The classic machine gun type sound is usually a seized drum. You can tell which one it is by simple taking out each drum in turn and when you close the lid if there is no click then the drum not in the printer is the offender. The black drum is missing possibly because you have not located the belt correctly. Usually the right blue lock on the belt is actually not locking the belt as the belt is not laying flat. Take the belt out and refit making sure that the projections that the locks sit it are flat to the chassis. Relock and look for the bad drum.

OKI C5100n Laser... | Answered on Mar 13, 2017

2 Answers

Paper jams consistely and then continues to feed, even if only printing one page

check your paper size setting on your print menu. i had this problem when i set the paper size smaller than the printer is able to handle (3x5 card) ... i just switched to 4x6 and don't have any problems.

OKI C5100n Laser... | Answered on Jan 13, 2017

1 Answer

What should I do when the Display says Service call 132:Error

After turning ON the
power or when cover
is closed, the sensor
detects that the unit is
missing.
1) Is an Error message displayed?
2) Is the LED head properly
mounted?
3) Does the Error take place
again?
Confirm that the lever is in
position.
Replace the toner feed unit.
Replace the ID units.

OKI C5100n Laser... | Answered on Oct 27, 2015

1 Answer

928 FATAL ERROR

Fuser Motor Lock Error The fuser is not operating properly
Check to confirm that the fuser
is in position.
Replace the fuser.
Replace the fuser motor.

OKI C5100n Laser... | Answered on Oct 27, 2015

1 Answer

Installed replacement Black Toner Cartridge. Now it says the all the toners are missing

was black an original oki cartridge or a cheap one? it makes a difference,some printers wont recognize cheap ones

OKI C5100n Laser... | Answered on Jun 17, 2015

1 Answer

How to reset black toner for oki c6150

Greetings,
try this In service mode.
Put Stop/reset 4 times orange => reset waste ink.
Put stop/reset 8 times orange => set level ink.

Regards,
TechSup1

OKI C5100n Laser... | Answered on Jul 22, 2014

1 Answer

How to reset Kdrum OKI C3200?

www.okidata.com/

OKI C5100n Laser... | Answered on May 24, 2014

0 Answers

I installed windows 7 and downloaded the driver

wow..that is good. but truly weird. good it worked out.

OKI C5100n Laser... | Answered on Dec 14, 2013

1 Answer

The blue color is not printing correctly. It comes out sort of pink and greens are yellow. I have a new balck drum. I have put in a new blue toner cartridge. I have tried adjusting color saturatio

create a doccument with four identical lines of text.
the text should be as follows:
your text in the colour Black, the cyan, then yellow then magentta
see if they print in the colours you used, if they are all wrong then delete all drivers associated with the printer and delete the printer, then follow the install proceedure again to reinstall, if just one colour is wrong the it is most likely a deffective cartridge.

OKI C5100n Laser... | Answered on Dec 06, 2013

0 Answers