20 Most Recent OKI C3200n Led Printer Questions & Answers


Inspect the rollers for dirty or damaged surfaces. Clean up any loose toner or other debris in the machine. Note: avoid touching any roller with bare skin; especially in the fuser section or the photosensitive drum in the toner section. Skin oil can cause poor print quality or premature degradation of the roller surface.

OKI C3200n Led... | Answered on Jul 15, 2017


It would help if you said where the paper jam was. However the fact that it was ok until you cleared the jam indicates you have knocked something out of place. Its just possible one of the high voltage contact springs that touch the drums has stuck in and no longer makes contacts with one of the drums. Make sure all the semi circular springs move in and out freely. Also check the led heads in the top cover. Make sure all the cables are seated in the heads ok. Make sure all the heads are in the same position and one has not turned around. Retrace your steps as your drums seem to be problem.

OKI C3200n Led... | Answered on Jun 25, 2017


Suggest you order a black drum, which may include a black cartridge. Replacing BOTH the cartridge and the drum should solve the sensor problem, then you can swap parts to isolate where the problem is.

OKI C3200n Led... | Answered on May 28, 2017


Here are Mac drivers on this link:

http://my.okidata.com/DSDownWeb.nsf/(MOC-C3200n)?OpenView&Start=1&Count=30&Expand=12



Click on this link or copy and paste the complete link into your browser.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe


I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

OKI C3200n Led... | Answered on Apr 18, 2017


Fatal error code 173:
This error indicates that the Image Drum Up/Down Process is not working properly. The errors are as follows:
140 - Yellow Drum Up/Down error
141 - Magenta Drum Up/Down error
142 - Cyan Drum Up/Down error
Solution:
1. Reseat the Image Drums. Ensure they are in seating properly into the drum carriage.
2. Reseat the Toner Cartridges. Ensure they are seating properly into the Image Drums.
3. Reseat the Contact Sensor Spring assembly and inspect it for damage or mis-alignment. If the springs appear bent or dis-lodged reseat them.

OKI C3200n Led... | Answered on Mar 23, 2015


you cant. laser printers (or led like oki) or more specifically dry toner electrostatic printers always have a margin to prevent the paper from jamming. the only way to print "full bleed" is to put paper in that is bigger than what you need, print the image, and trim it down.

OKI C3200n Led... | Answered on Jan 08, 2015


unplug it for about 10 minutes and plug it back in

OKI C3200n Led... | Answered on Mar 12, 2013


Have you contacted OKI Data? Live customer support is available 24/7 (within the US and Canada) at 1-800-OKI-DATA.

OKI C3200n Led... | Answered on Jan 28, 2013

Not finding what you are looking for?
OKI C3200n Led Printer Logo

Popular Tags

112 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top OKI Office Equipment & Supplies Experts

WTF Chuck.....
WTF Chuck.....

Level 3 Expert

387 Answers

Clive
Clive

Level 3 Expert

4345 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Are you an OKI Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

C OKI

  • C OKI

Most Popular Question

windows 8 says oki c3200n in error state

  • Office Equipment & Supplies
Loading...