Copystar Ri-2530 Printer - Answered Questions & Fixed issues


check if the microswitch on the finisher right side is broken,
the locking bracket attached to the copier left door has to engage
this switch to turn off attach finisher error

Copystar Ri-2530... | Answered on May 09, 2014 | 85 views


Please write me your copier brand name and model name.Some times when waste toner is full the tank than show massage replace the waste toner box.You should clean the waste toner than fix this massage.

Copystar Ri-2530... | Answered on Oct 21, 2013 | 138 views


Open the top cover and make a copy. Does the lamp under the glass light up brightly and move across the underside of the glass ? If not the lamp has burned out or the thermal limiter has blown.

Copystar Ri-2530... | Answered on Dec 27, 2012 | 52 views


This error isin referencetoa bad laser unit. The only way around this issue is repair, replacment of that unit will be my recommendation. Do not hard reset this unless you have the new part in. Now while the tech is in there you might want him to check the DC board for issues. A bad laser unit can be the result of a bad dc board.

let me know if you have any more questions rulds2008@gmail.com

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620

Copystar Ri-2530... | Answered on Jan 13, 2012 | 50 views


Standard 10/100BaseTX,Parallel IEEE1284, Serial RS-232C


You have the option of using a Parallel cable, Serial or Network Cat5e cable.


The best option is networking the printer, so that everyone on the network can print to it.


If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response

Thanks, Joe



I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

Copystar Ri-2530... | Answered on Jun 20, 2011 | 86 views


Only prints the 3/4 of the top, the bottom or the sides?

Remove the cartridge. Be sure the seal was completely removed, shake the cartridge to the sides (like a wave movement) and put it back to the printer. It should fix the problem.

Check the installations instructions for the cartridge at the copier door.

Copystar Ri-2530... | Answered on Nov 30, 2010 | 49 views


Okay, please reread your question because as I read it, it makes no sense to me.

Who tells it to form for stamp and what does that mean? Does the printer have a font or application that will print postage on the envelope?

Copystar Ri-2530... | Answered on Oct 15, 2010 | 159 views


heres the info:
Power source ....................................................... Inch specifications: 120 V AC, 60 Hz, 11 A Max.
Metric specifications: 220-240 V AC, 50 or 60 Hz, 4.5 A (Average).
Power consumption.............................................. Rated power consumption: 1320 W Max. for Inch specifications
1368 W Max. for Metric specifications

Regards..

Copystar Ri-2530... | Answered on May 21, 2010 | 281 views


look in the manager program of the scanner..if no one deleted the stuff from the memory it may be there after all..or if the scanner has internal memory it might be there ..if not than it is gone for good..But most printers when you make a scan you can edit it and see it in the scanner's manager library ..an it may be there ..

Copystar Ri-2530... | Answered on May 14, 2010 | 77 views


usually caused by something in the paper path after the
print head, or the print head. Cleaning the surface of the print head with a
lint free damp towel may cure the problem.

or for our technician help call us at our toll free no 18884276640

Copystar Ri-2530... | Answered on Jun 23, 2009 | 109 views


Copystar Ri-2530... | Answered on Mar 23, 2009 | 535 views


Hi, Actually if the machine still working fine you donot need to call for service, all wat you want to do is to clear the service from the machine, here wat happen, there was an error in ur machine , the sensor report this to machine memory, but you fix this problem and the sensor didnot regonize this is solved, so you have to reset the service of the machine and you will be fine.
Wat i understand it says just call for service is there is any code with this message?
if not donot worry
hit on the touch screen 1087 twice, this will take you to maintenance mode, scroll on screen to see reset the service, highlight it and hit the reset buttom and u will be fine.

Let me know wat happen.
Best Regards


I’m happy to help further over the phone at https://www.6ya.com/expert/mustafa_06f84c65ab5cc745

Copystar Ri-2530... | Answered on Mar 02, 2009 | 94 views


Press 1087, 1087 until the machine shows U000 self status, press 163, press start and then scroll to execute and then press enter. the machine will iunitialize and come ready for copying

Copystar Office... | Answered on Apr 27, 2019 | 3,777 views


Bad Hard Drive

Copystar Office... | Answered on Mar 14, 2019 | 101 views


Paper jam in the paper cassette

Copystar Office... | Answered on Mar 14, 2019 | 168 views


There is still a jam inside the copier

Copystar Office... | Answered on Mar 14, 2019 | 27 views


Sounds to me like you need a developer change and these machines must have OEM toner

Copystar Office... | Answered on Mar 03, 2019 | 50 views


By calling a service agent and arranging a repair visit

Copystar Office... | Answered on Oct 10, 2018 | 30 views

Not finding what you are looking for?
Copystar Ri-2530 Printer Logo

Popular Tags

27 questions posted

Ask a Question

Usually answered in minutes!

Top Copystar Office Equipment & Supplies Experts

CheckitRight
CheckitRight

Level 3 Expert

1363 Answers

Tammie Duggan
Tammie Duggan

Level 2 Expert

57 Answers

Tareq Bin Mostaq...
Tareq Bin Mostaq...

Level 3 Expert

1449 Answers

Are you a Copystar Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...