20 Most Recent Honeywell Ademco 6160 Alpha Keypad Vista 15p, 20p Questions & Answers


Delete device 3 which is the long range radio, or make sure the long range radio signal is good and that the radio is registered.

Honeywell Ademco... | Answered on Jun 05, 2019


Hit the * which will display the status of the faulty zones.

Honeywell Ademco... | Answered on Jun 05, 2019


there is no volume control on a 6160 keypad

If you need further help, reach me via phone at https://www.6ya.com/expert/joshua_f823c77053c73844

Honeywell Ademco... | Answered on Oct 10, 2016


There is no battery in the Honeywell 6160 keypad. It is powered by the transformer in the control panel. If it is showing BAT on the keypad, check the main system battery in the control panel.

Honeywell Ademco... | Answered on Nov 29, 2015


I would contact whoever installed it for you and see what they think . these far away fixes do some good but not as much as a person actually looking at it .

Honeywell Ademco... | Answered on Nov 19, 2015


BF error on keypad is for Failure of Backup Communications. Usually for cell backup. If it is a monitored system, call your monitoring company. If not monitored, either call a service tech to repair it or if you have the programming code, you can turn the feature off in programming. Best to have a professional do it though.
If you have had any phone changes since it was installed, that may be a lead to where the problem is. Especially, if it is no longer monitored. BF basically means there is a problem when the system attempts to dial out to the central station on the backup setup. Again, this can be disable in programming if you no longer need it.

Honeywell Ademco... | Answered on Jan 02, 2015


Did this come with the manual for the keypad. You can go on line to honeywell or call them and ask for tech support.
Ed

Honeywell Ademco... | Answered on Jan 02, 2015


No alarm after exit or it does alarm after exit
Ed

Honeywell Ademco... | Answered on Jan 02, 2015


http://www.security.honeywell.com/documents/vista15p_20pUM.pdf

Honeywell Ademco... | Answered on Aug 18, 2014


It can be disable in installer level programming. It is called confirmation of arming ding. It is so you know that your system is arming when you use you keyfob from outside of your house.

Honeywell Ademco... | Answered on Aug 06, 2014


It indicates a problem with your cellular radio or that your alarm system is programmed to look for one that is no longer working or connected to your system. This can be disabled in installer level programming.

Honeywell Ademco... | Answered on Aug 06, 2014


In order to add a user code, you first need to know a master code.

Honeywell Ademco... | Answered on Jul 30, 2014


Not knowing what brand makes it tough, most of the time if you push any key it should silence it.

Honeywell Ademco... | Answered on May 17, 2014


Does it look dead pr does the lights just go ojt?

Honeywell Ademco... | Answered on May 03, 2014


Power down the panel, remove the battery. Hold down the * and # while re-powering the panel. It will jump right into programming. Release the *and # button and proceed with programming.

Honeywell Ademco... | Answered on Dec 10, 2013


hit *20 then put in whatever 4 digits you want as installer code. write this down on your program sheet for future reference. yes, you should have a program record sheet to follow and know how to navigate in programming or else you could make things worse.

Honeywell Ademco... | Answered on Oct 19, 2013


replace main system battery. this will either be a 12volt/4ah battery or a 12volt/7ah battery.

Honeywell Ademco... | Answered on Oct 19, 2013

Not finding what you are looking for?
Honeywell Ademco 6160 Alpha Keypad Vista 15p, 20p Logo

59 questions posted

Ask a Question

Usually answered in minutes!

Top Honeywell Home Security Experts

Sean

Level 2 Expert

80 Answers

Marvin
Marvin

Level 3 Expert

85222 Answers

Mike

Level 3 Expert

4367 Answers

Are you a Honeywell Home Security Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Honeywell Home Security

  • Honeywell Home Security

Most Popular Question

vista 20p momentary sounds alarm when

  • Home Security
Loading...