20 Most Recent Ademco Honeywell Ademco 944TSP-WH 3/4" Recessed Contact with Terminals and 3/8" Magnet (White) - Page 9 Questions & Answers


For security reasons,if you enter the wrong password 5 times continuously, the DVR will be
locked and will automatically unlock after half an hour. But if you forget your password, you have
to consult the seller to provide super password. The super password will change every 60
minutes. For example:
From 2016-01-08 09:00 to2016-01-08 09:59 the password would be:790912
From 2016-01-08 10:00 to 2016-01-08 10:59 the password would be:767680

For Today(2019-04-06 Time:- 10:00 TO 10:59):- password would be 238240 CCTV Networking Technical Support Subscribe,like,share

Home Security | Answered on Apr 06, 2019


<https://www.justanswer.com/firearms/6ou60-canon-executive-vault-battery-went-dead.html>

<https://www.cannonsafe.com/blog/how-to-change-the-combination-on-your-cannon-safe-digital-lock/>

Home Security | Answered on Apr 05, 2019


Ignore the zero.....
Dial directly to the numbers.
Every time you Pass the number that is 1x so if it says
L4X 20
Then dial 4 times to 20... and so on....
Hope this helps, you can call a locksmith to walk you thru it too if they have time.

Home Security | Answered on Apr 05, 2019


This is more common than you know. The good news is that a good safe cracker should be into it with in a few minutes unless a relock was triggered.
In either case a locksmith who specializes in safes will get you fixed up.
Good luck.

Home Security | Answered on Apr 05, 2019


Call a locksmith.

Home Security | Answered on Apr 05, 2019


Don't know this model (sounds American) but in general batteries can only be replaced once the safe is open.

For emergency access (sensible) models have a couple of externally accessible terminals onto which you press a 9 volt battery and then open with your combination so you can get to the internal battery to change it.

Looks like this model (from a pic found online at https://en.shpock.com/i/WgwKN4clWgXDaZ53/ ) has a key over-ride to unlock for emergencies. In that case it's unlikely to have an external battery connection.

Also from a pic online at
https://en.shpock.com/i/WgwKN4clWgXDaZ53/
the battery is accessed (once opened) via the battery cover clearly visible!!! on the back of the door.

If you haven't noticed this my guess is you have not opened it, in which case....

If you don't have a key then chuck out the safe.

My reasoning is if you can open it without key or combo then it's a useless junky safe, so ditch it. If you can't, then the only way to retrieve the contents is to cut it up, and then you will have to ditch it anyway.

CAVEAT: URLS go dead, so the picture may not be valid by the time you read this.

Home Security | Answered on Apr 03, 2019


I take help from online websites that have this service like helping in repair some like reliable-store have instant help.. others are a bit slow which I don't prefer... rest is up to u.. U can try

Home Security | Answered on Mar 21, 2019


Check power connection i had same problem. May not be making contact

Home Security | Answered on Mar 18, 2019


Contact Swann directly to request instructions.

Home Security | Answered on Mar 15, 2019

Not finding what you are looking for?
Ademco Honeywell Ademco 944TSP-WH 3/4" Recessed Contact with Terminals and 3/8" Magnet (White) Logo

2 questions posted

Ask a Question

Usually answered in minutes!

Top Ademco Home Security Experts

Brad Brown

Level 3 Expert

18110 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Lawrence Oravetz

Level 3 Expert

10543 Answers

Are you an Ademco Home Security Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Ademco Home Security

  • Ademco Home Security

Most Popular Question

vista 40 system touch pad screen says

  • Home Security
Loading...