20 Most Recent
Questions & Answers
Device code for mintek dvd. No code for mintek dvd
You may want to search for the code by performing a Power Scan, I will include the steps below. If this doesn't resolve this there is most likely a compatibility issue.
1.) Press and hold the correct VCR button (about six seconds) until all mode button backlights come on, then release.
2.) Press 500 pound (#)
3.) With the desired equipment on, press and hold the VCR/DVD button until all mode button backlights illuminate (about 3 seconds), then release.
4.) Press and release the Power button.
5.) Press the Up button once a second while pointing the remote at the desired equipment. If the code for the equipment comes up, the equipment will power off.
6.) Press the POUND (#) button. If the code entered is valid for the remote, the mode light flashes three times.
To verify the code works try several different functions for that equipment.
on Oct 13, 2011
Where can i get parts
It depends on what parts you are looking for. If they are generic parts then you can get them from various electronics stores. If oyu are after specific parts such as the DVD drive, buttons or control boards then you are very unlikely to find them. Even if you do they will probably cost more than a brand new DVD player.
on Mar 01, 2011
The red light is on,
it could be that the DVD Player is on Standby and need to do Hard reset <br />
If you want to fix the DVD Player write to me , <a href="mailto:email@example.com">firstname.lastname@example.org</a>
on Aug 26, 2010
Not finding what you are looking for?