20 Most Recent JVC AV-27530 27" TV - Page 4 Questions & Answers

I read your additional comments that your Tv is working fine with DVD hook up. This means your TV is capable deliver VIDEO and AUDIO signal. You had Direct TV working from your Bed room it mean you have signal from service. This lells me that you connect your TV to the RF input. So either the RF input terminal have a bad solder connections inside TV or the Tuning unit is bad. But you don't need them, you can connect your direct TV box to your TV thru S-video and RCA/Optical audio so it can work just like working with DVD. Good luck.

JVC AV-27530 27"... | Answered on Jul 11, 2009

Although I've had some success soldering a few of those lugs back into place, it will be more dependable to replace it with a new part. The TV says, "no user serviceable parts inside". A technician would be your best bet. He should give you an estimate in advance.

JVC AV-27530 27"... | Answered on Jul 09, 2009

HI...I have the same problem and I am trying this today (Expert advice on forum) ... Hope it works!

Try unplugging the power cord of your T.V. for 1-4 hours for a "HARD RE-SET".
If T.V. does not work normally after this, then you'll need parts/repiars. (Internal circuit/voltage problem).

Best of Luck!
I will know if it works for me in about 2 hours!

JVC AV-27530 27"... | Answered on Jul 01, 2009

Turn off the closed capition

JVC AV-27530 27"... | Answered on Jun 19, 2009

if you have the remote control number RM-C203 with your tv than try noise muting in your menu settings mine did the same thing i just put noise muting off and it worked for me

JVC AV-27530 27"... | Answered on Jun 15, 2009

memory ic is the problem if new claim for warranty if not buy a new ic but it need to reprogramme by copying memory ic from another working same tv

JVC AV-27530 27"... | Answered on Jun 07, 2009

You can try checkin the fuses I had a problem like that with my stereo receiver took it apart changed the fuses works great

JVC AV-27530 27"... | Answered on May 16, 2009

Try adjusting the screen control on the flyback transformer. It may be accessible without removing the cover . The access hole is usually on the back of the set and wil be marked "screens" Failing that please post the model number

JVC AV-27530 27"... | Answered on Apr 28, 2009

the tube is going out on it

JVC AV-27530 27"... | Answered on Apr 27, 2009

Could you try to set your channel to 2,3, or 5 when viewing video from dvd. Or try search which channel will the video and audio will sync in tune. I think this is an old tv.

Hope this one helps.

JVC AV-27530 27"... | Answered on Apr 26, 2009

I don't have an answer for your question.

However, I do have a suggestion. You can hook up a vcr to your tv, then put the tv on channel 3 or 4 (whichever the vcr is set for) and change the channels through your vcr. You have to have the cable go first to your vcr and then out to the tv.

JVC AV-27530 27"... | Answered on Apr 11, 2009

Yes it does, it could be just the connection on your speaker suddenly loose.

JVC AV-27530 27"... | Answered on Apr 08, 2009

An aging FBT if it still can be adjust using screen adjustment on FBT that will be a small tweak.

But if you are inexperienced with this, asked someone who knows how to do it to fix it for you.

JVC AV-27530 27"... | Answered on Apr 08, 2009

turn off closed captioning

JVC AV-27530 27"... | Answered on Apr 07, 2009

Sometims the speakers are switchable in the menu, make sure you have them switched on

JVC AV-27530 27"... | Answered on Apr 06, 2009

well take the back off on the transformer should be two adj. pot screen control on top focus on bottom normally try to turn up screen control good luck

JVC AV-27530 27"... | Answered on Apr 03, 2009

The problem you describe is not really related to a timer function being set. The unit is in shutdown and the light is blinkng to let you know there is a problem.
There are several possible causes. the most common is a failure in the vertical deflection circuit due to a bad vertical IC and possibly a capacitor, zener diode and resistor.

JVC AV-27530 27"... | Answered on Mar 29, 2009

Not finding what you are looking for?
JVC AV-27530 27" TV Logo

168 questions posted

Ask a Question

Usually answered in minutes!

Top JVC Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76237 Answers

Todd Hill
Todd Hill

Level 2 Expert

433 Answers

matt martin
matt martin

Level 3 Expert

1257 Answers

Are you a JVC Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

JVC Televison & Video

  • JVC Televison & Video

Most Popular Question

keeps saying d s t dynamic gamma off

  • Televison & Video