20 Most Recent JVC AV-27050 TV Questions & Answers


If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/

JVC AV-27050 TV | Answered on Aug 01, 2014


I'd be curious to hear where do the other guys found those 12V/500 mW.

I am holding in my hand a transient suppressor from an LCD TV power board with two lines on it - the first is saying LT7232 and the second is P6KE120A.

I can't find a reliable reference for LT7232 anywhere through Google, however P6KE is a well known series of transient suppressors and I am ready to bet this is the proper component here.

Hope this helps avoid confusion.

www.coppelltvrepair.com

JVC AV-27050 TV | Answered on Dec 14, 2012


It sounds that the main power supply section to your TV has the fault. The horizontal thik lines that appears crawling down across the screen should be of video 'HUM'. Have you replaced the main filter capacitor at the power supply section? If not, replace it along with the main rectifier. The AC power is rectifed by a bridge and applied ot this main filter capcitor. It will have a capacitance value between 120 to 350MFD 450VDC. Check this section. Measure the rectifed DC voltage acorss this main filter capacitor. It should be around 350VDC, if your home power supply line is 220VAC. If it is 110AC, this DC voltage will be around 165VDC; and it should be. If rectified DC voltage found lower than the input AC voltage, replace the rectifier bridge. In some sets, this bridge section have four diodes. Some other circuits, a bridge rectifier stalk may be used.

JVC AV-27050 TV | Answered on May 24, 2012


check your caps and diods check board for visual problem

JVC AV-27050 TV | Answered on May 20, 2012


Use RCA cables from the DVD player or cable box to the front inputs.

JVC AV-27050 TV | Answered on Jun 16, 2011


The tv programming codes that was came with ur owner manual belong to ur tv model don't work.Useally u out of luck.Try website like Remotes.com to buy an original remote or very close to the original remote.Also might have some more programming codes u can tries.

JVC AV-27050 TV | Answered on Dec 11, 2010


HI I am having the same problem. tv sound is fine, then fades so that 50 is the only sound volume to hear the show. It happens intermittently. Did you get your's solved? thanks

JVC AV-27050 TV | Answered on Nov 20, 2010


For the above problem there are many possibilities one of it may be the board issue, kindly call the technician to sort the problem as you cannot do without knowledge.
Kindly rate my help++++ Thank you.

JVC AV-27050 TV | Answered on May 09, 2010


between image controls, (contrast-brightness-colour), Check the "colour" setting. should be near the middle of it's way.



if an automatic scan was performed before the event, please start it again, but assure proper country selection when asked (or better, check if there is a country selection menu and have it set to your country BEFORE starting the autoscan.

JVC AV-27050 TV | Answered on Aug 31, 2009


Use the App Search feature.

JVC Televison &... | Answered on Jan 19, 2020


Without a remote control, you can't.

JVC Televison &... | Answered on Jan 13, 2020

Not finding what you are looking for?
JVC AV-27050 TV Logo

Popular Tags

13 questions posted

Ask a Question

Usually answered in minutes!

Top JVC Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76204 Answers

Todd Hill
Todd Hill

Level 2 Expert

433 Answers

matt martin
matt martin

Level 3 Expert

1257 Answers

Are you a JVC Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

JVC Televison & Video

  • JVC Televison & Video

Most Popular Question

voltage lt7232 zener diode

  • Televison & Video
Loading...