JVC AM FM CD DET FACE CAR STEREO - Answered Questions & Fixed issues

Make sure the red wire is still connected or make sure the red wire hasn't been severed. Also, check the fuses located in the engine compartment. The red wire connects accessory terminal in the fuse block. Also check the fuses in the cabin. This fuse box is typically located on the driver's side, at knee level, next to the door panel, and underneath the dashboard. As a last resort, the unit can be taken to an authorized or factory service center.

JVC AM FM CD DET... | Answered on Sep 11, 2019 | 14,657 views

your accessory power for the radio is on the wrong circuit,wish the red wire of the radio

JVC AM FM CD DET... | Answered on Jun 16, 2019 | 91 views

Try disconnecting your battery, reconnecting it, and resetting your stereo. If that doesn't work, the constant power (yellow wire) or ignition wire (red wire) may have come in contact with ground or isn't properly connected. Make sure everything is connected properly and try resetting your stereo. If it is still flashing "protect", the unit needs servicing Contact JVC Customer Care Center at: 800-252-5722.

JVC AM FM CD DET... | Answered on Aug 14, 2019 | 12,034 views

Did you ever find a fix for this? This is happening to me as well...thanks!

JVC AM FM CD DET... | Answered on Jan 18, 2019 | 8,231 views

here is the manual it would help to install your device


Ifthis solution helpful/useful for you please rate the solution. THANKS FOR USINGFIXYA.

JVC AM FM CD DET... | Answered on Oct 06, 2018 | 260 views

This answer is found on page 16 of manual. goto BT mode and Press and hold [MENU]. Select

JVC AM FM CD DET... | Answered on May 07, 2018 | 622 views

I suggest you ensure the ground is made to a sensible ground point and the supplies are also good and the antenna is also properly grounded and then monitor the supply voltage and the current consumed by the radio until it begins to distort. If the voltage and current remain steady the fault is either local interference or inside the radio, probably in the tuner.

If the current climbs and the voltage remains steady the fault is likely in the audio section...

JVC AM FM CD DET... | Answered on Nov 18, 2017 | 338 views

Contact JVC customer service please.

JVC AM FM CD DET... | Answered on Jun 27, 2017 | 2,648 views

Did you verify it has 12 volts on it's main power wire? Make sure the ground connection is good?

JVC AM FM CD DET... | Answered on Jul 03, 2016 | 372 views

It has to be taken to service or to the dealer.

JVC AM FM CD DET... | Answered on Jun 17, 2015 | 153 views

The instruction book can be downloaded from books.jvc.com.

JVC AM FM CD DET... | Answered on Mar 27, 2015 | 106 views

If you have a JVC in your car now, you will need the extraction keys that were given with the radio. (thin sheet metal keys) that allow radio to be removed. They can be purchased by calling JVC once you know model or reach out to installer who might have them available.

JVC AM FM CD DET... | Answered on Feb 11, 2015 | 60 views

bad connection in one of the speaker wire.

JVC AM FM CD DET... | Answered on Jan 02, 2015 | 360 views

    • 1Remove the faceplate around your stereo. Slip a flat object under the edge and gently pry it up. A flat-head screwdriver works well. There will be clips holding the faceplate in place, so feel for them. You may need to move your faceplate up or down to slide it out of position.
    • 2 Find and remove any screws holding the stereo in place.
    • 3 Slide the stereo component out far enough to see the label on top of the stereo. Write down the model and serial numbers of your car stereo component.
    • 4 Locate your VIN number at the base of the front window, driver side. If you can't read your VIN off the window, you will have it on your proof of insurance and title as well. Write it down.
    • 5 Locate your car manufacturer's toll-free Customer Service number and call them. Click on the link in the Resource section of this article and find your car manufacturer's toll-free number.
    • 6 Call the number and let customer service know you need your stereo code and have the vehicle's VIN number, as well as the model and serial numbers off the stereo. They will provide you with the code. If you are unsure how to input the code, be sure to ask for support at this time.

JVC AM FM CD DET... | Answered on Nov 26, 2014 | 275 views

when i go to connect my power supply nothing happens the jvc will not turn on, but when i connect my old pioneer it works, what is going on?

JVC AM FM CD DET... | Answered on Oct 30, 2014 | 813 views

Are you a technical person? If so, reply. Otherwise it is advisable to take it to a service center.

JVC AM FM CD DET... | Answered on Oct 20, 2014 | 1,231 views

samsung tv go in to tools on remote

JVC AM FM CD DET... | Answered on Aug 31, 2014 | 40 views

Not finding what you are looking for?

916 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top JVC Car Audio & Video Experts

Dalynn Turner

Level 2 Expert

346 Answers


Level 3 Expert

85219 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a JVC Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides