Top 10 JVC AM FM CD DET FACE CAR STEREO Questions & Answers

JVC AM FM CD DET FACE CAR STEREO Logo

Question

  • 14,645 People Helped

JVC CD player won't turn on, but will eject CD and display time.

My JVC car CD player won't turn on. it will accept CD's and eject them and will display the time when the display button is pressed. but it won't turn on or do any other function. it used to work just fine but suddenly stopped. i know it's not in the CD player itself b/c i bought a new one and it does the same thing when plugged in. could it be in a wire? is there a way to fix it?

Posted by on

Answer

  • Most Helpful of 7 Answers

Make sure the red wire is still connected or make sure the red wire hasn't been severed. Also, check the fuses located in the engine compartment. The red wire connects accessory terminal in the fuse block. Also check the fuses in the cabin. This fuse box is typically located on the driver's side, at knee level, next to the door panel, and underneath the dashboard. As a last resort, the unit can be taken to an authorized or factory service center.

Posted on Feb 01, 2009

Question

  • 12,021 People Helped

JVC KD-R610 is stuck in Protect mode

I have a KD-R610 and the screen keeps flashing protect mode. I am wondering how I an get it off of protect mode because I don't know what the problem is. Have tried checking the cords and reset the system but nothing works.

Posted by on

Answer

  • Most Helpful of 3 Answers

Try disconnecting your battery, reconnecting it, and resetting your stereo. If that doesn't work, the constant power (yellow wire) or ignition wire (red wire) may have come in contact with ground or isn't properly connected. Make sure everything is connected properly and try resetting your stereo. If it is still flashing "protect", the unit needs servicing Contact JVC Customer Care Center at: 800-252-5722.

Posted on Feb 07, 2011

Question

  • 10,469 People Helped

how to set time on jvc kd-r210

how to set time on jvc kd-r210

Posted by on

Answer

  • Most Helpful of 1 Answers

Setting the clock

  • Press and hold SEL (select) for more than 2 seconds. "DEMO", "CLOCK H", "CLOCK M", "DIMMER", or "AMP GAIN" appears on the display.
  • Set the hour.
  • 1. Select "CLOCK H" (hour) if not shown on the display.
  • 2. Adjust the hour.Using the Control Knob.rwalker540_3.jpg
  • Set the minute.
  • 1. Select "CLOCK M" (minute).
  • 2. Adjust the minute. Using the Control Knob
  • rwalker540_4.jpg
  • Finish the setting. To check the current clock time or change the display mode.
  • Press DISP (display) repeatedly. Each time you press the button, the display changes as follows:
  • • During tuner operation:
  • • During CD operation:
  • • During power off:
  • The power turns on and the clock time is shown for 5 seconds, then the power turns off.

Posted on Nov 11, 2010

Question

  • 8,217 People Helped

JVC KD-HDR60 has stopped responding

JVC KD-HDR60 has stopped responding to commands. No volume control, can't eject disc, can't turn off, nothing works. It is currently playing a CD, but can't stop or eject. Tried resetting, no go.

Posted by on

Answer

  • Most Helpful of 5 Answers

Did you ever find a fix for this? This is happening to me as well...thanks!

Posted on Oct 11, 2012

Question

  • 7,978 People Helped

JVC KD-S15 setup - How do I turn "Demo" Off?

After I've done my set up, information keeps scrolling across the face of the radio -- it will not show the station number, just keeps on scrolling. What do I need to do?
AO

Posted by on

Answer

  • Most Helpful of 3 Answers

press and hold the sel button....select an itenm (useing the silver button beside the volume dial).....then use the volume dial to adjust ,time , demo alot of others...then press sel button to finish.....this is straight out of the instructions...hope it helps you

Posted on Feb 25, 2009

Question

  • 6,569 People Helped

My JVC car stereo display " Protect " on display

My JVC car stereo display " Protect " on display screen and not working. It is continuously showing Protect on display and all other keys n remote are inoperative, plz reply soon, it is requested to solve above problem.

Posted by on

Answer

  • Most Helpful of 1 Answers

FIRST PRESS THE RESET BUTTON BEHIND THE FACE IF DONT WORK CHECK ALL SPEAKER WIRES SOMETHING MIGHT BE TOUCHING

Posted on Aug 02, 2011

Question

  • 4,029 People Helped

my jvc cd player keeps saying miswiring chk wiring

my jvc cd player keeps saying miswiring chk wiring and then reset. I have an adapter connecting the wires. It use to work until I got a new battery. How do I fix it

Posted by on

Answer

  • Most Helpful of 1 Answers

Need model number

Posted on Oct 27, 2013

Question

  • 3,554 People Helped

HELP STEREO CUTS OUT!

I just installed a jvc car stereo. When turning up the volume with the radio or cd at about 15-17 it will cut out and starts making a crackling noise. I can turn it all the way down and then turn it back up again and it's fine, but if I go up over 15-17 it does it again. The stereo I had in the car before this one did not do this, and my daughter had installed this jvc stereo in her car before we put it in mine and it did not do this.

Posted by on

Answer

  • Most Helpful of 4 Answers

ok , ive found the problem with mine. I checked the voltage between the earth wire on the head unit and the battery in the car. I found that when i turned the headunit up to around 17-20 there was up to 3volts differance, which is when it would cut out. So ive run a new earth wire and she's all sweet . Even the cd player works now.

Posted on Aug 19, 2008

Question

  • 3,152 People Helped

cannot set clock on my JVC KD-G335

I cannot seem to work out how to set the clock on my JVC car stereo KD-G335
I tried holding down the select button but no go!
Hope you can help and THANK YOU

Posted by on

Answer

  • Most Helpful of 2 Answers

You need to hold the sel button down for a little while then it will change displays thats when you use youe right seek button until you hit the Clock H to change the clock hour or Clock M to change the minutes when you hit it you use your volume control button to change the time.

Posted on Jan 18, 2009

Question

  • 2,989 People Helped

can't set time on jvc kd-s14 car stereo

what do I do to set the clock?

Posted by on

Answer

  • Most Helpful of 2 Answers

Press and hold select button on front of receiver
Use left and right control know (the one you would use to forward or reverse a track with the cd)
This will carry you into some more settings, including the hour and minute access
Use the volume knob to rotate to desired hour

Posted on Mar 12, 2009

916 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top JVC Car Audio & Video Experts

Dalynn Turner

Level 2 Expert

346 Answers

Marvin
Marvin

Level 3 Expert

85219 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a JVC Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

AM FM CD DET FACE CAR STEREO JVC

  • AM FM CD DET FACE CAR STEREO JVC

Most Popular Question

2010 vw cc factory stereo amp popping

  • Car Audio & Video
Loading...