20 Most Recent Canon NP 7130 Black and White Copier - Page 4 Questions & Answers


it is a fuser error code. you either have a torn fixing film or one of the heaters have a fault

Canon NP 7130... | Answered on Apr 02, 2010


At first. clean the optic. Change the developoer. if no good? Cange toner - it is the soft way. Then photo drum. its may be not espensive if you calling to service. Clealing the coronat first and the second. There are no nothing

Canon NP 7130... | Answered on Mar 15, 2010


what does it hum?? singing in the rain????

Canon NP 7130... | Answered on Oct 02, 2009


check toner maybe its near to end.

Canon NP 7130... | Answered on Sep 23, 2009


Your manual on aashish.canon
on google account.
mail

Canon NP 7130... | Answered on Sep 03, 2009


Hello sir; I believe the problem is te cartridge you purchased is refurbish one, please return to exchange.

Canon NP 7130... | Answered on Aug 12, 2009


Check the paper tray actuators & sensors.

Canon NP 7130... | Answered on Jul 30, 2009


There is a mircoswitch which may become slightly bent. The microswitch rides on the left hindge of the feeder inside the covers. When the start button is pressed the feeder may move upward slightly causing the miroswitch to loose contact with the hinge. You can usually reform the arm of the switch and make it work.

Canon NP 7130... | Answered on Jul 29, 2009


does anyone know where to get an owners manual for cannon np7130f online for free??

Canon NP 7130... | Answered on Jul 15, 2009


replace your fuser section.

Canon NP 7130... | Answered on Jul 10, 2009


Error code E000 error in the fixing unit...thermofuse is broken or thermostart is out...to know this you must know how to open the fixing unit...and check the thermofuse and the thermostart with multitester...or see if the heater lamp is turn on...

Canon NP 7130... | Answered on Jul 10, 2009


If the light is a red light with a flash shape then the machine probably has a jam. Look for jams and once you have cleared any jams switch the machine off and then on again. It could be the toner light if there are about six red dots - in this case you need to add toner.

Canon NP 7130... | Answered on Jul 06, 2009


what machine?

Canon NP 7130... | Answered on Jun 10, 2009


check ac power supply

Canon NP 7130... | Answered on Jun 04, 2009


check thermister, thermoswitch or fixing lamp (helogen)

Canon NP 7130... | Answered on Jun 03, 2009


yor copier is problem thermostater or ac board problem repear it

Canon NP 7130... | Answered on May 30, 2009


Please remove the toner cartridge and shake it side to side. then make sure it's inserted all the way in.

Canon NP 7130... | Answered on May 19, 2009


what actaully you need? if you need a manual is another issue but if you need your machine to work do this.
1.check the corona wires in corona units if broken replace if not
2.clean the corona units so that they will be free from discharging.

please vote me

Canon NP 7130... | Answered on May 14, 2009


I believe the 2 springs hold your side door closed, alot of people use scotch tape to hold the door closed.
Anyway 1 goes on the left side and the other goes on the right side of the door. If you open the door and look down on the plastic frame, not part of the door, you'll see 2 holes on the left and 2 more on the right. The one end of the spring slide down thru the 1 hole and turn it 90 degrees and pull it up so it hooks on the plastic piece between the 2 hloes. Do the same for th other side. Now, the top end of the spring attaches to a plastic tab in line with the holes on the door, toward the top side. Some times those tabs break off.
If that's the case we'll have to get a little creative
Good Luck

Bob

Canon NP 7130... | Answered on Apr 17, 2009


Sounds as if it is low on toner.When they run low, the motor will continue to run trying to add more toner.The toner add system is a glorified flour sifter.Eventually it will set the add toner on.Good Luck

Canon NP 7130... | Answered on Apr 02, 2009

Not finding what you are looking for?
Canon NP 7130 Black and White Copier Logo

136 questions posted

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

old marine
old marine

Level 3 Expert

2260 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Canon Office Equipment & Supplies

  • Canon Office Equipment & Supplies

Most Popular Question

doesn 39 t feed paper shows p

  • Office Equipment & Supplies
Loading...