20 Most Recent
Questions & Answers
Web roller is loose
you will need to take the fuser out and remove the top part of the fuser where the web is.
there is a gear in there that fails to advance the web, it may need to be replaced
on Nov 20, 2019
I have canon ir400 machine...
Sir i have recently purchased IR 400 canon photcopier my problem is the
machine is giving error 604as soon the machine is started problem . plz solve my problem
on Jul 22, 2019
I believe I can help you as I am prepared to send the entire users manual to in a PDF format if this is ok. I specifically found the remove used toner and add new toner section but I believe you may benifit from thr entire manual. Although I am new to this "FIXYA" forum I am a 20 year veteran toner boy(lol) so I am sure I can help. Just respond to "FIXYA" with a favorable comment and let me know how you wish me to respond. I see your E-Mail address and can send it that way which seems the most effective way. Glad to help, happy New Year. P.S. even if ya dont say happy things about my I help I will gladly help, I was just hoping 4 an atta boy from them! :-) Take care.
on Dec 01, 2018
E805 error in canon ir 400
E805 error code means failure of one of the many fans inside the
copier. If there is not a dash with four numbers after the 805 code on
the display, it is one of two fans - FM1 the transport bed fan or FM9 -
the reversing fan just below the fuser assy. There are several checks
that can be done but a too lengthy to be described. A tech maybe the
best answer depending on your mechanical ability.
on Sep 05, 2018
i have ir400 machine but not touch the sharpnees button
on Jun 13, 2018
Canon 405 Problem
when i start copy Error E100 occurs. How do i solve this problem please immediately send me the manual of canon 405 and immediately send me solution of this problem.
on Jan 25, 2018
Order of Turning On/Off the Machines
(host machine + accessories)
If a delivery accessory (e.g., finisher) is installed,
be sure to respect the following order when turning
<Turning On the Power>
1. high-capacity stacker, finisher (either)
2. professional puncher (non-Japanese model
3. host machine
<Turning Off the Power>
1. host machine
2. high-capacity stacker, finisher (either)
3. professional puncher (non-Japanese only)
- Failure to observe the order of turning on the
machines prevents the host machine from
recognizing the accessories.
- Failure to observe the order of turning off the
machines will lead to an error ('E730' or
on Oct 10, 2017
Not finding what you are looking for?