20 Most Recent Sharp EL-1611P Calculator Questions & Answers


It sounds like there is a printer error. Take of the cover where the paper is. There should be a little ink roller. Try taking this out and look in and see if the rubber band with the numbers on it is broken. If so, the machine is not worth repairing, unless you can get it replace under warranty. If it is not broken, try turning the machine on and off with the ink roll out of the machine. This should reset the print head as long as nothing is in there jamming it up. Good luck John

Sharp EL-1611P... | Answered on Aug 10, 2017


Press 2nd DEC to cycle through the available settings.

Sharp EL-1611P... | Answered on May 29, 2014


do not power on the device, it is crucial that you leave it to dry and as soon as possible put it in a bag of rice. The rice will absorb the moisture in the device. You should give it about two weeks (the longer the better) and you should have completely removed all battery components at this point if there are any. After a generous waiting period of two weeks or so, take it out of the rice and give it a try. I spilled a full 8 oz cup of hot coffee RIGHT into my laptop keyboard and it immediately shut off but I followed the above steps and I am using it right now just fine and it is a year later. Good luck!

Sharp EL-1611P... | Answered on Apr 08, 2014


Press 2nd [P/NP] to switch between print and non-print modes. See page 2 of this manual.

Sharp EL-1611P... | Answered on Jan 15, 2013


INK ROLLER REPLACEMENT

If printing is blurry even when the ink roller is in the proper
position, replace the roller.
Ink roller: Type EA-732R

WARNING
APPLYING INK TO WORN INK ROLLER OR USE OF
UNAPPROVED INK ROLLER MAY CAUSE SERIOUS
DAMAGE TO PRINTER.

1) Turn the power off.
2) Remove the printer cover. (Fig. 1)
3) Remove the ink roller by turning it counterclockwise and
pulling it upward. (Fig. 2)
4) Install the new ink roller and press it in the correct position.
Make sure that the ink roller is securely in place. (Fig. 3)
5) Put back the printer cover.

Sharp EL-1611P... | Answered on Jun 08, 2012


Sounds like the printwheels are out of time. Sorta of major repairs. gears on side of printer have to be lined up in proper areas. there are small black arrows on the gears. Best bet is look at a working machine and try to line up. Machine may not be worth the time unless you jsut want to try it. Sharp uses the same printers in many different models.

Sharp EL-1611P... | Answered on Jan 02, 2012

Not finding what you are looking for?
Sharp EL-1611P Calculator Logo

Popular Tags

46 questions posted

Ask a Question

Usually answered in minutes!

Top Sharp Office Equipment & Supplies Experts

Anthony Karuku

Level 2 Expert

268 Answers

amir hamza
amir hamza

Level 2 Expert

318 Answers

k24674

Level 3 Expert

8081 Answers

Are you a Sharp Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Sharp Office Equipment & Supplies

  • Sharp Office Equipment & Supplies

Most Popular Question

set calculate without printing

  • Office Equipment & Supplies
Loading...