20 Most Recent Sharp AR-M237 Copier Questions & Answers


This indicates to me that there is a Fax module fitted to your machine. If this is the case it may have developed a fault. Do you use the fax? If not you could try removing it so that you can use your copier as normal.

Good luck

Follow me on Twitter @CDOS_Service

Sharp AR-M237... | Answered on Sep 12, 2019


Sharp AR-5620N getting f-2 error. What is the solution

Sharp AR-M237... | Answered on Jul 02, 2019


E7-03 indicates hard drive trouble. the hard drive is going bad. There is not a whole lot you can do besides trying to reseat all connectors for the hard drive (the harness/wire from the HDD to the ICU PWB board) otherwise replace the hard drive.

Sharp AR-M237... | Answered on Apr 29, 2019


You can reset the nic card password by ressetting the nic card to factory defaults, custom setting, key operator, 00000 , print settings , network settings, reset the nic, default password is Sharp

Sharp AR-M237... | Answered on Oct 24, 2018


on this code you may have to clean out the developing unit and start with fresh developer. Make sure the developer unit is not leaking from one of the bearings. You may need a tech for this one...

Sharp AR-M237... | Answered on Jun 25, 2018


F2 errors means problem with toner supply or toner cartridge itself. For better understanding it is necessary to obtain a subcode by pressing START key. Clean toner cartridge CRUM chip contacts and check if cartridge destination is proper for your area.

Sharp AR-M237... | Answered on Sep 16, 2017


We fixed this by taking the finishing unit (tower to the left) and leaning against it so it had better contact with the rest the copier

Sharp AR-M237... | Answered on Jan 20, 2017


mite need a need anew drum.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Sharp AR-M237... | Answered on Mar 13, 2016


Toner supply abnormality


check toner motor and DV mag sensor

Sharp AR-M237... | Answered on Jan 28, 2016


H3 00 Heat roller high temperature detection

Sharp AR-M237... | Answered on Apr 27, 2015


is there one in the machine. does it have the phone cord hook up on the side of the machine if not you do not have the fax capability, it was an option on this model. you would have a hard time finding one now. if it is there the fax board is damaged and would need to be replaced but like i said you would have a hard time finding one.

Sharp AR-M237... | Answered on Oct 06, 2014


most of the time it is the chip on your toner cart. you need a new toner cart.

Sharp AR-M237... | Answered on Jul 29, 2014


Your paper may not be feeding, try your bypass tray. If that works you may need new feed tires for your cassette.

Sharp AR-M237... | Answered on Jul 09, 2014


toner problem, remove toner restart copier and reinstall toner. If that doesn't work you may need a new toner.

Sharp AR-M237... | Answered on Jul 09, 2014


Hola buenas tardes, me podrian ayudar tengo una copiadora sharp ar m237 y me esta marcando el codigo U2-40 y no se que hacer alguien pude hacesorarme

Sharp AR-M237... | Answered on Jul 03, 2014


Log to admin setttting and change,

Sharp AR-M237... | Answered on Jun 27, 2014

Not finding what you are looking for?
Sharp AR-M237 Copier Logo

223 questions posted

Ask a Question

Usually answered in minutes!

Top Sharp Office Equipment & Supplies Experts

Anthony Karuku

Level 2 Expert

268 Answers

amir hamza
amir hamza

Level 2 Expert

318 Answers

k24674

Level 3 Expert

8081 Answers

Are you a Sharp Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Sharp Office Equipment & Supplies

  • Sharp Office Equipment & Supplies

Most Popular Question

says close finisher unit finisher

  • Office Equipment & Supplies
Loading...