20 Most Recent Sharp AL 1215 Black and White Copier Questions & Answers


Try cleaning the bottle out with soapy water.

Sharp AL 1215... | Answered on Feb 13, 2020


If you reach up under the left side of the scanner you'll feel a little clear piece of plastic. It rotates about 90 degrees from locked to unlocked. If you unlock it and you want to permanently be unlocked, just pop the plastic thing off with a screwdriver, but MAKE SURE IT'S UNLOCKED BEFORE YOU DO.

Skelton Business Equipment Houston Copiers

Sharp AL 1215... | Answered on Aug 06, 2014


You can get a service manual at justmanuals.com

I’m happy to help further over the phone at https://www.6ya.com/expert/jayw_0e86fb055a7b73de

Sharp AL 1215... | Answered on Aug 08, 2011


This appears to be a gear related problem. To begin with, please check the toner cartridge if its spilling toner. If it is, then the waste toner box is full and needs to be emptied. On the spring lever you will see a small hole, then open it and empty the waste. If need be, unscrew the two screws and completely empty it and the noise will be gone.

Sharp AL 1215... | Answered on Jun 20, 2011


clean the mirrors for haze. and check for residual image on the drum for bad c blade

Sharp AL 1215... | Answered on Nov 12, 2010


If I were you, I would install a new toner and the light will stop blinking and then one can make a copy.

Sharp AL 1215... | Answered on Sep 07, 2010


The red tube means that the Drum Unit needs to be replaced. Good Luck

Sharp AL 1215... | Answered on Aug 18, 2010


if you have replaced the toner unit the main cpu is bad not realLY worth fixing but this is a very good copier you can get them on ebay , this the only copier you can refilll the toner unit for $6 & DRUM FOR $15 get a AL1655 best deal

Sharp AL 1215... | Answered on Jul 07, 2010


Your drum has reached the end of it's useful life. That is the symbol for a drum.

Sharp AL 1215... | Answered on Feb 08, 2010


L - may be "LAMP"

call to service . you need to professional

Sharp AL 1215... | Answered on Dec 18, 2009


Dear sir; The L-6 error code it means "laser drive, motor", It can be reset, the procedure as follow;
1, press "clear", "exposure mode", "clear", "exposure" those keys.then machine go dead.
2, enter 14, then press print.follow the direction willtake car the problem.
If you need more help just let me know I'm always around, or generously give me good rating. thank you,
HAVE A MERRY CHRISTMAS !!!

Sharp AL 1215... | Answered on May 14, 2009


Its supposed to reset itself without a service code. If it isn't let me know.

Sharp AL 1215... | Answered on May 09, 2009


does the same occur when the manual paper feed path is used?

Sharp AL 1215... | Answered on Apr 23, 2009


Hi Your Copier needs a service, that is what that led is for Hope this helps Regards

Sharp AL 1215... | Answered on Mar 01, 2009


H4 means the fuser can't heat up. The fuser lamp probably burned out. Sorry, nothing can be done without tools and new lamp

Sharp AL 1215... | Answered on Feb 25, 2009


clean up paper delivery roller, if paper come out little bit out and stop, then you have a paper exit sensor damage

Sharp AL 1215... | Answered on Dec 17, 2008


replace the toner

Sharp AL 1215... | Answered on Nov 03, 2008


It depends... never use a Reman cart in these machines... only use sharp...especially if the machine is under warranty.

Does this happen when,
Using the Doc Feeder
When making copies from the Glass
Or when you print from a computer (assuming you print from a PC)

If you print something and this happens then it is inside the machine
Probably toner or developer dumping...

Take a few pieces of large white paper and cover the entire glass surface... make a copy is the line there? If so see the answer above... if not then close the top and make a copy with no paper on the glass... is that black line there.. If so then your top needs adjustment...

One more test
If you make a copy using the doc feeder, this black line only occurs when making copies with the doc feed, clean the **** glass, and try again...

Sharp AL 1215... | Answered on Oct 25, 2008


-Did you try to replace the Toner Cartridge? if not try to replace and installed properly.
or check the Toner Cartridge if installed properly.

Sharp AL 1215... | Answered on Oct 16, 2008

Not finding what you are looking for?
Sharp AL 1215 Black and White Copier Logo

Popular Tags

36 questions posted

Ask a Question

Usually answered in minutes!

Top Sharp Office Equipment & Supplies Experts

Anthony Karuku

Level 2 Expert

268 Answers

amir hamza
amir hamza

Level 2 Expert

318 Answers

Tareq Bin Mostaq...
Tareq Bin Mostaq...

Level 3 Expert

1449 Answers

Are you a Sharp Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Sharp Office Equipment & Supplies

  • Sharp Office Equipment & Supplies

Most Popular Question

paper icon flashes checked tray

  • Office Equipment & Supplies
Loading...