20 Most Recent Sharp AR-C160 Color Copier Questions & Answers


go to service mode then cancel it after that switch it off for 5 seconds then turn the machine on again

Sharp AR-C160... | Answered on Nov 23, 2018


WHEN F2 FLASHES JUST PRESS START KEY U WILL RECEIVE A SUB CODE.IF SUB CODE IS 02 THIS IS TONER SUPPLY PROBLEM IF 04 THIS IS DATA PROBLEM LIKE AS IDENTIFICATION PROBLEM MODEL ERROR TYPE ERROR.BYMIAN AKHLAQ

Sharp AR-C160... | Answered on Jul 29, 2014


heater unit fails to reach certain temp
try this
(COPIER>FUNCTION>CLEAR>ERR)
other wise
check lamps and thermister

Sharp AR-C160... | Answered on Jul 02, 2014


input C + interrupt + 0 + interrupt +start +14 +start

Sharp AR-C160... | Answered on Dec 26, 2013


You might Google the manufacturer and the error code to find a solution. If you have an owners manual, I would check there first to find how to solve the problem. If you don't have an owner's manual, you might be able to find one at the printer manufacturer's website in the support section. You also might also enter the "menu" on the printer if there is one, and discover whether you can solve the problem there.This is just a shot in the dark and and I would try the owner's manual first, but after all other options have failed, and if there is no "reset" button, you might try unplugging it for a couple of minutes and it should reset itself to factory default settings which might solve the problem. You will loose any settings and any work in progress. Just a guess. Good luck.

Sharp AR-C160... | Answered on Nov 11, 2013


This can be a fault of the controller of the direct current. Apply to service This fault can be not eliminated by you.

Sharp AR-C160... | Answered on Mar 02, 2012


F1-70 is communication trouble between the machine and the sorter finisher. Check the cables connecting the copier and the finisher and power off and on machine. Should clear the code. If problem persists, may need a new board.

I would also check the ground between the copier and finisher.

Don't forget to rate your answers, please!

Sharp AR-C160... | Answered on Nov 15, 2011


H5 .1continuous POUT not-reached error

Sharp AR-C160... | Answered on Aug 18, 2011


H5-01. 5 Continuous POUT not-reached error

perform the following procedure to enter the simulation mode.


#-interrupt-c-interrupt-14-ready key

Sharp AR-C160... | Answered on Aug 18, 2011


fuser problem

Sharp AR-C160... | Answered on Jun 13, 2011


This is a fuser roller life error. The machine has an internal counter that counts parts' usage. This code can only be reset by a technician.

Sharp AR-C160... | Answered on Oct 10, 2010


This code means that you had 3 or more jams at the heat rollers that weren't removed. The machine had to protect itself and locked you out because more paper jams in this area will cause damage to the fuser unit. Inspect and remove the paper jams. Press these 4 buttons within 4 seconds P * C * it will ask for simulation number, enter 14 and press the black and white copy button, follow on screen instructions. if i remember it says execute and the copier will restart.........you may have to press the CA key to exit simulation mode.

Sharp AR-C160... | Answered on Jul 18, 2010


Attached to the main board in a metal box accessible from a panel in the back of the printer.

Sharp AR-C160... | Answered on Jun 18, 2010


main motor lock detection
shifter motor trouble

Sharp AR-C160... | Answered on May 24, 2010

Not finding what you are looking for?
Sharp AR-C160 Color Copier Logo

57 questions posted

Ask a Question

Usually answered in minutes!

Top Sharp Office Equipment & Supplies Experts

Anthony Karuku

Level 2 Expert

268 Answers

amir hamza
amir hamza

Level 2 Expert

318 Answers

k24674

Level 3 Expert

8081 Answers

Are you a Sharp Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Sharp Office Equipment & Supplies

  • Sharp Office Equipment & Supplies

Most Popular Question

code use claer code h4 01

  • Office Equipment & Supplies
Loading...