20 Most Recent Russell Hobbs 10617 Glass 2-Slice Toaster Questions & Answers


Take a look through these...
See if you can figure out which of the many
models are available... Pick ONE.

We could be helpful... If you let us...

Results 1 7 of 7

We can help... you WILL be proud.

Carnac the Magnificent

Russell Hobbs... | Answered on Apr 18, 2018


may have screws on the bottom and the loader knob usually has to be pried off. Place soft wood like a ruler against the housing and pry carefully from side to side with a large screwdriver. After working on it, plug it in outside to a ground-fault ac plug on a fireproof surface to test.

Russell Hobbs... | Answered on May 12, 2016


Hello,

I would advice you check the user manual manual for this, because i cannot tell specifically the IC that is worn out, all you need to do is remove the IC, look at the top of the IC, you will see the number written on the IC, besides, you can take the IC to any electronic workshop to get the exact IC of your device.

Take care.

Russell Hobbs... | Answered on Nov 03, 2014


Hello, jon

I was trying to help you out here. Maybe this will help some? I was going backto some customers that asked questions in the recent past and even fartherback. It appeared that no one answeredsome of them, So, I thought I would take some of my personal time to see if Ican help. Even though this Informational site may not have your exact model orbrand, this site will help you a lot. Here is a site link about everything you want to know about toasters andpossibly yours, from
repair to trouble shooting it. http://home.howstuffworks.com/how-to-repair-small-appliances1.htm

Please if this helped you at all, if you can find the time and in your heart torate my help and some kind words written would be appreciated for my free help, I would appreciate it.

Here is also my direct link to my own pages of other areas of my expertise forother problems you might have in Automotive, Appliance, and Electronics. DropIn anytime for my help.

Thanks, Mike


http://beta.fixya.com/users/mc1bean

Russell Hobbs... | Answered on Oct 28, 2011


You can download the instruction manual by clicking on the following link.(http://www.russellhobbs.co.uk/pdf/product_236_14356.pdf ).Please don't forget to rate me if satisfied.Good Luck.

Russell Hobbs... | Answered on Jun 08, 2011


Friend,

Obviously only one side is getting current or only one element is functional. Eitherway, please open the sides of the toaster on the nonfunctional side and check if the wiring to the element is ok. If connections are OK then the element may have got burnt. Please replace it and reconnect the wires and close the sides.

Russell Hobbs... | Answered on Feb 22, 2011


Click on the link below to read the solution to this problem:
http://www.fixya.com/support/t1187710-lever_not_stay_down

Russell Hobbs... | Answered on Jan 11, 2011


It sounds like the unit has failed, I don't know what you could possibly do at your current location. You are going to at least need a new heating element and replace it, and if you are going to do that you may as well get a new one. You can contact the manufacturer and claim a warranty on it and they will ship you a new one, that is your best bet if there is no possible way to return it.

Thanks
Tim

Russell Hobbs... | Answered on Oct 10, 2010


Buy a new toaster.

After a week or two return the broken toaster to the shop saying it won't work and ask for a refund.

Good luck!

Russell Hobbs... | Answered on Sep 13, 2010


An integrated circuit constructed to provide control functions to a toaster oven cooking appliance. The control functions including compensation for input voltage fluctuations, compensation for residual heat due to recycling, audible signal generation, multiple mode selection, safety shut off and others. The integrated circuit also provides flexibility to accommodate multiple models of an appliance in a product line. If you have the tools and the part, you can fix it yourself otherwise to the repair shop

Russell Hobbs... | Answered on Oct 29, 2009


Check magnatron Fuse (The big one) if not probably the magnatron tube.

Russell Hobbs... | Answered on Aug 12, 2009


The magnetron has failed. This is the part of the oven which produces the microwaves and they can fail without warning at any time after they leave the factory. Failures are not as common as they once were, but unless the oven still qualifies for a warranty repair it's always more cost effective to scrap the oven and buy a new or used replacement.

In your case, you may be able to recoup some money by selling your oven purely as an electric fan oven with grill. The magnetron failure does not in any way indicate that the grill or fan oven are about to fail.

If you do decide to replace the magnetron, make sure that a new microwave gasket is fitted as well; this is a small wire mesh doughnut (US= donut) which fits around the neck of the magnetron and is crushed into place when fitted. Once used they cannot safely be re-used.

Russell Hobbs... | Answered on Jul 21, 2009

Not finding what you are looking for?
Russell Hobbs 10617 Glass 2-Slice Toaster Logo

Popular Tags

33 questions posted

Ask a Question

Usually answered in minutes!

Top Russell Hobbs Kitchen Appliances - Others Experts

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1691 Answers

wadingriver
wadingriver

Level 3 Expert

2223 Answers

bobalix

Level 3 Expert

471 Answers

Are you a Russell Hobbs Kitchen Appliances - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...