20 Most Recent
Questions & Answers
Factory reset on pro-642
There is no factory reset unplug the camera shut down the DVR then reboot the DVR then reconnect the camera if this doesn't work check the power supply to the camera it might not be getting the correct voltage hope this helps thanx Chris ..
on Mar 01, 2014
I have to Swann security cameras will they work my Bunker Hill DVR
1st lets figure out how old your swann cameras are?? If they are within say 5rs old and are digital. Then the answer is YES they should work no problem. After all a digital signal is a digital signal. Unless encrypted of course. Given you have the correct connectors that go from the camera to DVR you should be fine. If not, you can find adapters at any decent electronics store. Kinda like Radio Shack used to be. That is unless you are wireless, then the above "connector" comment is jibberish, and should be ignored.
Good luck Mr. Morgan
on May 17, 2019
Not finding what you are looking for?