20 Most Recent LG 47LN5400 47" LED TV 1920x1080, 120 Hz. HDTV - Page 2 Questions & Answers


If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
Faults & possible causes to LCD screen are given with illustrations. You can get an idea about the fault to an extent..

LG Televison &... | Answered on Nov 14, 2019


LG TV Codes 0178, 1265, 0039, 0037, 0606

1. Turn on a your device. NOTE: Please read steps 2 through 4 completely before proceeding. Highlight or write down the codes and device you wish to program before starting step 2.
2. On the remote control, press the TV key once.
3. Press and hold SET until the LED (red light) blinks twice, then release SET.
4. Use the Manufacturer's Codes then enter the first four-digit code for your device. If performed correctly, the LED will blink twice. NOTE: If the LED did not blink twice, repeat steps 2 through 4 and enter the same code again.
5. Aim the remote control at the device and press POWER once. The device should turn off. If it does not, repeat steps 2 through 5, trying each code for your brand until you find one that works.


https://voxxintl.zendesk.com/hc/en-us/articles/225305947-Information-Owner-s-Manual-Code-List-and-Support-for-the-One-For-All-URC4220-Universal-Remote-Control

LG Televison &... | Answered on Nov 14, 2019


Without a remote control, you can't unlock it.
If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one.
To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability? Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have.
Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the site http://electrohelponline.blogspot.com/ Check this site too. https://remotesearch.blogspot.com/
https://electrohelponline.blogspot,com/
Universal remote controls are available at most of the electronic spare part selling shops; and by Online shopping.

LG Televison &... | Answered on Nov 14, 2019


If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
Line, faults & possible causes to LCD screen are given with illustrations. You can get an idea about the fault to an extent.

LG Televison &... | Answered on Nov 14, 2019


it's a television not a browser!

If it is a smart television, Google

make model manual

LG Televison &... | Answered on Nov 10, 2019


My DVD player only plays in black and white - TOSHIBA FORUMS

forums.toshiba.com/.../My-DVD-player...plays-in-black-and-white/.../47...
39L1350U) and am trying to hook up the DVD player. ... My DVD player only plays in black and white ... My DVD player is an old Sony. .... Was using and S-Video connecting cable to the TV. ... suggested to use VIDEO instead of COLOR STREAM, I changed that in the TV menu, plug the red and while at the back of TV where ...

No Color When My DVD Player Is Hooked Up - Community ...

community.insigniaproducts.com/...DVD-Players/...Color...My-DVD-Pla...
Jul 14, 2014 - I hooked up my DVD player and I have no color. ... you need to use the connections on the left side of the TV or on connections on the back. .... is turned on, which can cause this black and white image issue you're having. ... If the Player shows correctly on a different TV with the same hook up, and different ...

The picture from a disc player displays on the TV in black ...


LG Televison &... | Answered on Nov 08, 2019


I did not have my remote that went with our LG tv so I go to the side panel of the tv and touched the menu button, then options, then turned off the Simplink.

LG Televison &... | Answered on Nov 07, 2019


The led driver AND the T-con board are bad. If you could see a picture with the flashlight then the T-con board would be good. It is not. The led driver can be on the main board or the power supply board. You can get these parts from here: TV Parts Universal TV Stands DLP Chips ShopJimmy

LG Televison &... | Answered on Nov 05, 2019


As far as I can see on the support page, here: Product Support
there is no firmware upgrade. An upgrade is only made, when several people have a issue with there device, and it can be solved by upgrading the firmware. Ir is NO SOLUTION for real defects.
You even can't upgrade if the device is not working correct.
It needs to run a short program, put is a small part of the RAM, and during the upgrade it can't lose power, because the little program has to flash (put new software in) the electrical erasable memory.
When something goes wrong during the update, nothing works and you need to visit a service centre to put things right.
As long as your TV works fine, don't update. When LG really does have an update, they will email all registered owners and carefully explain how to do the upgrade.
To be sure about any updates, register your TV on the support site.
When you have a problem with the TV contact LG or a certified repair centre close to you.
It would not be wise to try to change something on your TV, as long as you are not 100% sure it would improve the TV.

LG Televison &... | Answered on Nov 04, 2019


Did you try replacing the batteries, they go dead, especially if someone puts something heavy on it and it keeps a button pressed for a long time. I have an LG TV, and I did that, I now keep the remote on top of everything, never under things. If replacing batteries does not work, there are universal remotes that can be programmed to work to work with your TV, try a local store like Walmart and read the labels to make sure they list LG as one of the TV's the remote will work with.

LG Televison &... | Answered on Nov 02, 2019

Not finding what you are looking for?
LG 47LN5400 47" LED TV 1920x1080, 120 Hz. HDTV Logo

20 questions posted

Ask a Question

Usually answered in minutes!

Top LG Televison & Video Experts

Ekse

Level 3 Expert

13434 Answers

The Knight
The Knight

Level 3 Expert

76171 Answers

RONALD CARTER JR

Level 3 Expert

438 Answers

Are you a LG Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

LG Televison & Video

  • LG Televison & Video

Most Popular Question

lg tv 47ln5400 no picture only audio

  • Televison & Video
Loading...