20 Most Recent RCA RCU600M Remote Control - Page 5 Questions & Answers


Hi there, This should be the PDF file with all the codes you need. Hope this helps!
CBR2009

http://www.remotecodelist.com/remotes/innovage/Jumbo_Universal_Remote.pdf

RCA RCU600M... | Answered on Jul 24, 2009


http://remotefinder.rca.com/default.aspx?site=rca

RCA RCU600M... | Answered on Jul 24, 2009


I found that these websites should have all the codes and instructions for most remotes
http://www.xdiv.com/remotes/
or http://www.remote-codes.com/

RCA RCU600M... | Answered on Jul 15, 2009


Code 002 for Philips TV Code 003 for Philips TV Code 004 for Philips TV Code 008 for Philips TV Code 012 for Philips TV Code 019 for Philips TV Code 062 for Philips TV Code 068 for Philips TV Code 069 for Philips TV Code 075 for Philips TV Code 076 for Philips TV Code 086 for Philips TV Code 087 for Philips TV Code 088 for Philips TV Code 130 for Philips TV Code 132 for Philips TV Code 134 for Philips TV Code 167 for Philips TV Code 183 for Philips TV Code 196 for Philips TV

RCA RCU600M... | Answered on Jul 13, 2009


here is manual, instructions how to program are in there.. 'hope it will help

http://tv.manualsonline.com/mdownloads/783a7d35-23ad-48c4-8f74-ec7de8468067.pdf

cheers!

RCA RCU600M... | Answered on Jul 12, 2009


Ask them, they can get you all remote codes

RCA RCU600M... | Answered on Jul 11, 2009


you dont need a code just program normally when it comes to the point to put in the code hold up on channel button till tv shuts off the press the tv button again

RCA RCU600M... | Answered on Jun 25, 2009


I found that this website should have all the codes and instructions for most remotes
http://www.xdiv.com/remotes/
or http://www.remote-codes.com/

RCA RCU600M... | Answered on Jun 12, 2009


http://www.dvdchips.co.uk/
try this site u can get from here.
aslo u can try this.

Region hack DV-454 (Peter's) work on my DV-2650.
No problem.

Setting the TV system (on a DV-2650)

1. If the player is on, press STANDBY/ON to switch it to standby.

2. Using the front panel controls, hold down >> >> then press STANDBY/ON to switch the TV system.

The TV system change as follows:
* AUTO -> NTSC
* NTSC -> PAL
* PAL -> AUTO

I had to repeat this one time and it worked! many thanx

RCA RCU600M... | Answered on Jun 11, 2009


I am not positive that this will work for you, but it did for me. I have a Sanyo tv set that was stuck zoomed in. I have mediacom and a remote that is given with the cable box that was programmed to work on the tv, on this remote at the bottom the "#" button says "Aspect" above it and after pushing it the problem was fixed. I hope this helps.

RCA RCU600M... | Answered on Jun 01, 2009


i have the same problem can you help me please!!!

RCA RCU600M... | Answered on May 05, 2009


I found that this website should have all the codes and instructions for most remotes
http://www.xdiv.com/remotes/
or http://www.remote-codes.com/
if this helps please give a fixya rating

RCA RCU600M... | Answered on Apr 29, 2009


I found that this website should have all the codes and instructions for most remotes
http://www.xdiv.com/remotes/

RCA RCU600M... | Answered on Apr 26, 2009


I cannot locate one for Vizio tv....

RCA RCU600M... | Answered on Apr 03, 2009


Hi, this process might take a while, but here's how to get your remote to work:

Manual Code Search
1. Manually turn on the component you
want the remote to operate.
2. Press and hold the CODE SEARCH key
until the indicator light illuminates.
Then release the CODE SEARCH key.
3. Press and release the component key
that corresponds to the component you
want the remote to operate (TV, VCR,
DVD, DBS•SAT, CABLE, AUDIO
). The
indicator light blinks once and then
remains lit.
4. Aim the remote at the component. Press
the ON•OFF key continuously until the
component turns off.
Important: Because there are so many
codes, you may have to press the
ON•OFF key many times—possibly up
to 200 times.
5. When the component turns off, press
the ENTER key to store the code.

Auto Code Search
1. Turn on the component you want the
remote to operate.
2. Press and hold the CODE SEARCH key
until the indicator light illuminates.
Then release the CODE SEARCH key.
3. Press and release the component key that
corresponds to the component you want
the remote to operate (TV, VCR, DVD,
DBS·SAT, CABLE, AUDIO
). The indicator
light blinks once and remains lit.
4. Aim the remote at the component and
press the ON•OFF key once. The remote
automatically sends every code for
the specified component one at a time,
with the three-second delay between
each code. Keep the remote aimed at the
component throughout this process.
5. As soon as the component turns off, you
must press the ENTER key immediately
so the remote stores the correct
code. If you do not press the ENTER
key within three seconds, the remote
sends the next code in the list, and you
will have to start over from step 2.

Please rate if this helps!

RCA RCU600M... | Answered on Mar 18, 2009


hey give the remote to me and then i can fix it if u get what i fan

RCA RCU600M... | Answered on Feb 12, 2009

Not finding what you are looking for?
RCA RCU600M Remote Control Logo

143 questions posted

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76237 Answers

matt martin
matt martin

Level 3 Expert

1257 Answers

Cindy Wells

Level 3 Expert

6073 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

RCA Televison & Video

  • RCA Televison & Video

Most Popular Question

codes program innovage products jumbo

  • Televison & Video
Loading...