Top 20 HP 1050 Plain Paper Inkjet Fax Questions & Answers

Try to factory reset the printer following the OM for the model.

HP 1050 Plain... | 206 views | 0 helpful votes

Put it in the trash and get a printer that uses toner. Inkjet equipment is not worth fixing.

HP 1050 Plain... | 37 views | 0 helpful votes


This could be one of a few things... First, Windows 8 is a completely different animal from Windows XP! Try reloading your printer driver in Windows 8. If this doesn\'t work, you need to clean the paper pickup rollers at the front of the printer (where the paper first feeds into the machine. I use a Q-tip moistened (not sopping wet) with rubbing alcohol... gently scrub the whole pickup roller and then the feed roller next to it. Check carefully (with a flashlight) for any shards of paper that might be blocking the paper path. There is also a sensor flag (small finger of plastic) sticking up that the paper must hit to let the printer know that the paper is feeding through. If you do not see the sensor flag, it is either jammed or has been broken off when a piece of paper was pulled backward out of the paper feed area. First reload the printer driver, and try to print. If it doesn\'t print, check and clean the rollers and look for the sensor flag.

HP 1050 Plain... | 104 views | 0 helpful votes


HP started a recall on the 1040 fax and 1050 fax due to a potential overheating and fire hazard. Additional information can be found here:

Thought you may need to know.


HP 1050 Plain... | 161 views | 0 helpful votes

Has the receiver gotten faxes (from other senders) since your problem started? It sounds like the receiving fax is not answering the call. Also to determine if it's your problem or the receiver's problem send a test fax to someone else.

HP 1050 Plain... | 114 views | 0 helpful votes

Please do a copy of any page, if you have a printed copy the ink cartridge is OK and maybe you only have automatic answer turned off.

HP 1050 Plain... | 76 views | 0 helpful votes

Set the date and time:
The current date and time are shown in the display when the machine is on and ready for use (Ready mode). The date and time will be printed on all faxes you send.
1. Press Menu.
2. Press Left Right Arrow to choose SET DATE & TIME and press Start/Enter.
3. Press Start/Enter when the display shows Date Format.
4. Press Left Right Arrow to select either Europe (day month year) or USA (month day year) and press Start/Enter.
5. Press Start/Enter when the display shows Date & Time.
6. Set the date and time. You can move the cursor by pressing Left Right Arrow.
7. Press Start/Enter when the date and time are correct.
1-AM 2-PM will display.
8. Press 1 or 2.

HP 1050 Plain... | 383 views | 0 helpful votes


HP 1050 Plain... | 108 views | 0 helpful votes

If it is registering a paper jam, than more than likely there is some sort of obstruction in the paper path that is obscuring one of the sensors. My recommendation, manually feed a piece of thick card stock through the paper path and try to force any debris out. Also, you can try blowing a can of air through the path, this act should hopefully free any debris or dirt that is blocking the jam sensor.


HP 1050 Plain... | 133 views | 2 helpful votes

HP 20 Black cartridge for this printer yields 500 Pages.

HP 1050 Plain... | 31 views | 0 helpful votes

If you have a voicemail set on the same line then you may only be able to use either the fax or the voice mail if you want to the fax then change the rings to answer on the fax to 2 (setup button->basic fax settings->rings to answer->press ok on 2) keep the mode to auto mode. However if you want to use both the voicemail and the fax on the same line you might have to get a DRP (Distinctive Ring Pattern) from you telephone company.

HP 1050 Plain... | 198 views | 0 helpful votes

this is just the transition speed and line condition and you dont have to worry about it , the machine will give you an error code if the faxes dont go through alturnativly contact the reciever of the fax to check that they have recieved it

G3 means poor line condition

HP 1050 Plain... | 559 views | 4 helpful votes

I guess you should have the auto answer button turned off in the process of replacing the cartridges, turn on the auto answer and you should be all set

HP 1050 Plain... | 72 views | 0 helpful votes

Hello :

Just reset your Fax machine to get rid of this error .

good luck .

rate please !

HP 1050 Plain... | 231 views | 0 helpful votes

Your manual can be found here: ""

The simple answer is face down.

HP 1050 Plain... | 88 views | 0 helpful votes

G3 fax modem speeds= up to 33.6 bps

HP 1050 Plain... | 2,142 views | 2 helpful votes

Sorry but still do not have it fixed...i printed off the manual for this fax but our problem is not on the trouble shooting list. But i'd think you would be able to tell how to fix it without charging for the sollution.

HP 1050 Plain... | 153 views | 0 helpful votes

HP FAX 1050 Ink Cartridge (C6614A) Try Staples or Office Depot.

HP 1050 Plain... | 135 views | 0 helpful votes

HP 1050 Plain... | 55 views | 0 helpful votes

Not finding what you are looking for?
HP 1050 Plain Paper Inkjet Fax Logo

36 questions posted

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts


Level 3 Expert

4345 Answers


Level 3 Expert

13434 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

HP Office Equipment & Supplies

  • HP Office Equipment & Supplies

Most Popular Question

get paper jam

  • Office Equipment & Supplies