20 Most Recent DSC Pc Classic Led615 Keypad For Pc1500/1550 Led 615 Nw Questions & Answers


It depends on the alarm dealer that installed it since it was set by them when it was installed. The master code is never left something like 1234. You should call the last company to service the system. You can't typically default an alarm panel to put a code back to default.

DSC Home... | Answered on May 02, 2018


If you are referring to the siren or keypad tones or anything you can't. If the siren isn't loud enough then it may be a lack of power issue or you may need an additional one. 1 siren is usually adequate for most houses.

DSC Home... | Answered on May 02, 2018


Refer this issue to DSC for resolution.

DSC Home... | Answered on Apr 16, 2018


Either there is a fuse blown to.thevaux power or the wire has come loose from the terminal or there is a broken wire. Lastly have you checked to see if the transformer is still plugged into the outlet?

DSC Home... | Answered on Dec 16, 2017


Could you maybe look for a brand and model on the system? Either on the keypad or on the system box (metal panel somewhere in the house)?

Then maybe Google the brand and model, looking for a manual?

DSC Home... | Answered on May 20, 2017


The code is specific to your device and would ordinarily be known by the person that installed it

DSC Home... | Answered on Feb 04, 2015


go to the on screen menu either on camera or dvr

DSC Home... | Answered on Dec 05, 2014


need to know panel type and version

DSC Home... | Answered on Jun 25, 2014


When checking troubles on DSC, *2 brings up the trouble codes and trouble light will flash after pressing *2

1=Service Required (press 1 to get sub codes)

1=Low Battery
2=Bell Circuit
3=System Trouble
4=System Tamper
5=Module Supervision
6=RF Jam Detected
7=PC5204 Low Battery
8=PC5204 AC Failure

2=Loss of AC Power
3=Telephone Line Fault
4=Failure to communicate
5=Sensor (or Zone) Fault --- Press 5 to identify zone/sensor
6=Sensor (or Zone) Tamper --- Press 6 to identify zone/sensor
7=Sensor (or Zone) Low Battery --- Press 7 to identify zone/sensor
8=Loss of Time & Date

DSC Home... | Answered on Apr 10, 2014

Not finding what you are looking for?
DSC Pc Classic Led615 Keypad For Pc1500/1550 Led 615 Nw Logo

5 questions posted

Ask a Question

Usually answered in minutes!

Top DSC Home Security Experts

Sergio

Level 2 Expert

143 Answers

yobo007
yobo007

Level 3 Expert

515 Answers

The Los Man

Level 1 Expert

17 Answers

Are you a DSC Home Security Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

DSC Home Security

  • DSC Home Security

Most Popular Question

fob isnt responding but open car key

  • Home Security
Loading...