20 Most Recent Sanyo DS27910 27" TV Questions & Answers


High voltage failure. Take off the back cover and look for the high voltage transformer. The transformer has high voltage at about 380 volts with low current, but it will give you a shock. Usually, there is a capacitor or two, hopefully, there is only one capacitor. Check the DC voltage across it - should be about 390 to 400 volts. If not, change this high voltage capacitor. Buy one bigger than the current one by three times.

Sanyo DS27910... | Answered on Nov 24, 2017


On the front of the tv is a menu button. Press it and it will take you right in to fix this. Maneuver the menu using the ch up and down keys.

Sanyo DS27910... | Answered on Aug 18, 2011


You can purchase the original remote for $20.99 base price.

http://www.replacementremotes.com/SANYO/Buy-FXRG-6450459313-TV-Remote-Control.html

Sanyo DS27910... | Answered on Jun 10, 2011


bulp or color wheel bad

Sanyo DS27910... | Answered on Apr 12, 2011


many TV support AV after the last channel pls try last channel and go ahead you will find AV-1 THEN av-2 then channel 0 like that but i am not sure pls try

Sanyo DS27910... | Answered on Aug 26, 2010


The TV has different inputs modes, the TV tuner being on of them, another mode(s) will accept an input from the input jack(s) on the back, front or side of your TV. Look for and source button or input button on the front of the TV, press it waiting a few seconds between each push until the picture returns.

Sanyo DS27910... | Answered on Jun 19, 2010


You must get a remote......even most universals which are in expensive will have a video or input key.......the only way!!

Sanyo DS27910... | Answered on Jun 02, 2010


This could be a power supply board

Sanyo DS27910... | Answered on May 13, 2010


The video board that connected to the CRT(tv tube).Have defective componnents,discribe the problems,ask the tv shop for an estamate.$100-150 to repair,i would repair it.More than that no.

Sanyo DS27910... | Answered on May 08, 2010


cold solder in vertical ic or bad.

Sanyo DS27910... | Answered on Apr 21, 2010


check power supply to ic,, it will be 12v from smps..may be fusable resistor has gone

Sanyo DS27910... | Answered on Mar 22, 2010


Hi derrick
i`m going to help you with your tv but first;
Did you try and replace the fuse?
Sometimes the fuse will blow after a power surge or black out.
And could you give me your tv`s brand name and model number so i can assist you further ?

Sanyo DS27910... | Answered on Feb 23, 2010


No, it is not a High Definition (HD) TV.

Sanyo DS27910... | Answered on Oct 14, 2009


what is it

Sanyo DS27910... | Answered on Aug 24, 2009


hoz. out put bad

Sanyo DS27910... | Answered on Aug 19, 2009


hoz. out of sny. look for cap 200/100v

Sanyo DS27910... | Answered on Aug 19, 2009


What about a cap in the power supply for the vertical circuit? Usually found near flyback-- 2)check vertical drive signal (comes from jungle IC ).Use your scope....

Sanyo DS27910... | Answered on Aug 19, 2009

Not finding what you are looking for?
Sanyo DS27910 27" TV Logo

70 questions posted

Ask a Question

Usually answered in minutes!

Top Sanyo Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76173 Answers

 Grubhead
Grubhead

Level 3 Expert

5699 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1691 Answers

Are you a Sanyo Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Sanyo Televison & Video

  • Sanyo Televison & Video

Most Popular Question

sanyo model r n ds27680

  • Televison & Video
Loading...