Questions & Answers
I have a Sanyo ds19350 tv. It sometimes suddenly
High voltage failure. Take off the back cover and look for the high voltage transformer. The transformer has high voltage at about 380 volts with low current, but it will give you a shock. Usually, there is a capacitor or two, hopefully, there is only one capacitor. Check the DC voltage across it - should be about 390 to 400 volts. If not, change this high voltage capacitor. Buy one bigger than the current one by three times.
81 views | 0 helpful votes
My sanyo was working fine, then a child hit a
The TV has different inputs modes, the TV tuner being on of them, another mode(s) will accept an input from the input jack(s) on the back, front or side of your TV. Look for and source button or input button on the front of the TV, press it waiting a few seconds between each push until the picture returns.
288 views | 0 helpful votes
The fuse is blown,what can be the problem?
i`m going to help you with your tv but first;
Did you try and replace the fuse?
Sometimes the fuse will blow after a power surge or black out.
And could you give me your tv`s brand name and model number so i can assist you further ?
158 views | 1 helpful votes
Pictures goes to distorded wavy lines.
This could be attributed to tuning reception of your tv. If your using antenna only, it is most probable. If cable, check your line.
If this is a crt type, moving that tv with that size could somehow bend its circuit board. Loose connection is a probability. Could be some minor component is detached from solder. This can be attributed to tuner and vertical IC.
Just for an input.
289 views | 0 helpful votes
Not finding what you are looking for?