20 Most Recent Fuji FinePix S1 Pro Digital Camera Questions & Answers


You're using a lens with an aperture ring on it, aren't you?

Turn the aperture ring on the lens to its smallest setting (largest f/number) and lock it in place if it has a lock. You can control the aperture from the camera body the same way as on a lens without an aperture ring.

Fuji FinePix S1... | Answered on Aug 20, 2013


You're using a lens with an aperture ring on it, aren't you?

Turn the aperture ring on the lens to its smallest setting (largest f/number) and lock it in place if it has a lock. You can control the aperture from the camera body the same way as on a lens without an aperture ring.

Fuji FinePix S1... | Answered on Aug 20, 2013


Please CLICK HERE TO DOWNLOAD the operators manual for Fuji FinePix S1 Pro Digital Camera .
You must have Adobe Acrobat Reader installed to view PDF files. The reader is a free plug-in available at the Adobe web site.

Fuji FinePix S1... | Answered on Oct 11, 2011


If "Err" is displayed on the LCD panel on the top of the camera when the "MENU/EXE" button on the FinePix S1 Pro is pressed, check the following:


<If "Err" is not flashing>

1. If the slot cover is open, switch the camera off, close the slot cover and switch the camera back on.

2. If the remaining charge in the AA-size batteries is low, switch the camera off, replace the batteries and switch the camera back on.

3. If steps 1 and 2 above do not remedy the problem, contact the store where you purchased the camera or your nearest authorized FUJIFILM repair center.


<If "Err" is flashing>

1. Pictures cannot be taken because the remaining charge in the lithium batteries is too low or because the camera mechanism has stopped operating due to the camera being used in cold conditions.

In this event, switch the camera off, replace the batteries and then switch the camera back on. If replacing the batteries does not resolve the problem, set the focusing mode to "M" and release the shutter before switching the camera off briefly.

2. If step 1 above does not resolve the problem, contact the store where you purchased the camera or your nearest authorized FUJIFILM dealer.


Please click here to download the manual for Fuji FinePix S1Pro .


You must have Adobe Acrobat Reader installed to view PDF files. The reader is a free plug-in available at the Adobe web site.

Fuji FinePix S1... | Answered on Oct 11, 2011


You can download on

http://www.fujifilm.com/support/digital_cameras/manuals/pdf/index/s/finepix_s1000fd_manual_01.pdf

Is important for people who share their knowledge, know your comments.
If the answer is helpful, rate my answers

Fuji FinePix S1... | Answered on Sep 19, 2011


Turn the aperture ring on the lens to its smallest aperture (largest f/number). You can control the aperture from the camera as you do on a lens without an aperture ring.

Fuji FinePix S1... | Answered on Aug 23, 2011


Set the aperture on the lens to its smallest setting (largest f/number) and set the camera to the Manual exposure mode. You have to meter manually and control the aperture from the camera as on a lens without an aperture ring.

Fuji FinePix S1... | Answered on Aug 09, 2011


First check with another Memory card. If you have the same problem with another one, remove the card, then check the card contacts inside the camera. They might not conduct properly, if you don't see anytihg out of the ordinary here, then I recomend you contact Fujifilm directly.

If the problem is on one card only, try to format it while inside the camera, then if It doesn't work try to format it on a computer.
If by doing this the card is still not working, it is certainly dead.

Hope this helps.

Fuji FinePix S1... | Answered on May 19, 2011


I don't know if you have a manual fir this camera so I'm giving you a "Google" search link for a manual in PDF format. It the fourth one down.

http://www.google.ca/#hl=en&source=hp&biw=1303&bih=818&q=Fuji+S1+Pro+PDF+manual&aq=f&aqi=&aql=&oq=&fp=a5556ef3492e88b9

Okay, I've had several Fuji Pro cameras including the S5 Pro and these cameras had dual memory card slots it's listed in section 6 page 24 of this PDF manual

Okay what can happen and happened to me several times (didn't learn the first time) was that I had the camera set on the Compact Flash card and filled it up but the camera needs to be manual set for the next card it's not automatic. So I'm going to assume that the media card you are trying to write the new picture files to is full.

You can download the pictures and then format the car (in the camera) then continue or switch to the other card in the card slot. This camera used a Smart Media and a Compact Flash Card.

Cheers

Fuji FinePix S1... | Answered on Apr 12, 2011


Your Finepix S1 has wear on the drive sequence, that produces the error.
Fails to load the shutter.
You must obtain these parts attached except that the belt and motoradgubitosi_4.gif.

Fuji FinePix S1... | Answered on Mar 20, 2011


The Fuji S1 Pro is not a sealed camera, it's full electronic and vulnerable to moister. Hot and humid conditions will cause these cameras to fog and not just this camera either Nikon's and Canon will do the same so lets not point a finger at any one brand. Dampness is bad news for any camera that is not sealed and even sealed the camera can be moisture damaged through the lens. By hooking up the power supply you may have shorted out the damp circuity. That's already done and we can't back up so I'm suggesting that you place it on a warm register ( I don't know what climate you are in) or in a window with sun light heat on it OR and you got to be careful with this. I've placed my Nikon EM on a food warming tray to dry it out after a dunking it took, the camera wasn't submerged but got damp in the camera bag. I just hope you haven't scorched the electronics that's a nice little camera. Sorry for the bad news.

Fuji FinePix S1... | Answered on Dec 20, 2010


Hi,
You could download the firmware here ( choose with one is work in your camera) :

http://id.diplodrivers.com/download-driver/FUJIFILM/FINEPIX%20S1%20PRO
http://www.fujifilm.com/support/digital_cameras/software/usb/index.html
http://diplo-driver.com/download-driver/FUJIFILM/FINEPIX%20S1%20PRO
If none works, may be the problem is on hardware and suggest to check it at dealer.
Regards,

Fuji FinePix S1... | Answered on Dec 17, 2010


i cant help you if you note decrib exactly the problem...please say me what you have does with the camera..be for ffaulty or you have see that the camera dont works...have you proove if the camera works with a external suplly... look your camera has a 5 volt jack find a external supplies for 5volt plus internal minus external in the plug in jack proove if the camera works...if the camera works with external supply this is a typical fuji defect ..the internal board have burn the alimt....fuse
and the camera dont work with akkus or batteries paolo italy

Fuji FinePix S1... | Answered on Nov 18, 2010


Hello

The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.

Use these at own risk as it may further damage the camera.

Firstly , try connecting your ac adapter or usb cable.

Try holding the shutter button while switching on the camera.

Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).

Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.

Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.

Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.

Other than that , I would take the camera to a repair center for a evaluation to see if it would cost more to repair than to replace the camera.

If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.

You can also have a look at THIS link.

Hope the advise is useful. please do not hesitate to let me know if you need any further assistance.

Regards
Andrea

Fuji FinePix S1... | Answered on Sep 30, 2010

Not finding what you are looking for?
Fuji FinePix S1 Pro Digital Camera Logo

59 questions posted

Ask a Question

Usually answered in minutes!

Top Fuji Cameras Experts

Ekse

Level 3 Expert

13434 Answers

Azam Ali

Level 1 Expert

31 Answers

Parshiv Luthra

Level 3 Expert

395 Answers

Are you a Fuji Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

FinePix Fuji

  • FinePix Fuji

Most Popular Question

s1 displays fee use

  • Cameras
Loading...