20 Most Recent Denon AVR-1911 Receiver Questions & Answers

0 Answers

Denon AVR 1910 video output via HDMI port coming with visual noise / colored pixels

Denon AVR-1911... | Posted on Mar 04, 2017 | Be the first to answer

0 Answers

When I turn my Reciever on, green light flashes in 1s space for 3 seconds and then it's just green, but the display doesn't work.

Denon AVR-1911... | Posted on Oct 16, 2016 | Be the first to answer

0 Answers

While watching satellite tv, receiver will work

Sometimes equipment gets too hot and starts glitching. Try an improve cooling and air circulation. Often standing the thing on one end so it's tall will help keep it cool. See if it goes for longer with better cooling.

Denon AVR-1911... | Answered on Oct 29, 2013

0 Answers

Denon avr1911 .firmware update

Denon AVR-1911... | Posted on Apr 15, 2013 | Be the first to answer

0 Answers

Receiver is going in standy everytime

Denon AVR-1911... | Posted on Mar 31, 2012 | Be the first to answer

0 Answers

Denon AVR 1910 video output via HDMI port coming

Denon AVR-1911... | Posted on Feb 27, 2012 | Be the first to answer

1 Answer

I must've hit a couple buttons on direct tv remote

That's why they print manuals. What sound went out? TV or Denon speakers? We're not clairvoyant enough to back into the button sequence you MAY have initiated. I'd start with basic test tones.

Denon AVR-1911... | Answered on Sep 21, 2011

1 Answer

I con not get the surround sound to work. It only

The AVR-1911 is an A/V receiver with HDMI version 1.4a that can be connected to TVs and other devices that support 3D video such as Blu-ray disc players, game consoles, and set-top boxes. This receiver supports not only Dolby TrueHD, DTS-HD Master Audio and other HD Audio formats but also Dolby Pro Logic IIz for enhanced vertical and horizontal spatial performance at the front, the essence of 3D acoustics complementing the excitement of 3D video. The AVR-1911 comes with numerous other features such as 1080p up-conversion to give you a sharp, high-definition picture from DVD and other standard video sources, and a Glow-key remote control unit that is easy to use in the dark, to maximise your home theatre experience. Check if the RCA connector is properly connected.. Sometimes the problem is in the CD or DVD itself. Try to go to www.denon.com. ty

Denon AVR-1911... | Answered on Jun 23, 2011

3 Answers

How can i connect headphone

Hi rnazarians,

The headphone jack is being inserted in the "PHONE" jack of this unit. When the headphones are plugged into this jack, audio will no longer be output from the connected speakers or from the PRE OUT connectors. Please see image below.
--> You may also use the HDMI port to connect the unit to your TV using an HDMI cable.

Hope it helps.

Thank you for using FixYa.

Denon AVR-1911... | Answered on Jun 04, 2011

1 Answer

Since it appears that a Denon 1911 doesn't like

It seems that playlist are only supported on iPod. Page 22 of the manual. Playlists are not mentioned in any other context.

Denon AVR-1911... | Answered on Apr 12, 2011

1 Answer

I just hooked up my

unplug HDMI cable, then re-connect them. sounds like poor connection.

Denon AVR-1911... | Answered on Mar 28, 2011

1 Answer

In cable / sat mode

Carefully examine the front panel indicators for status of switches you DON'T want active.

http://www.retrevo.com/support/Denon-AVR-1911-Receivers-manual/id/23695ci376/t/2/

Denon AVR-1911... | Answered on Feb 13, 2011

1 Answer

Denon AVC 3530 manual

https://searchmanuals.net/search94-sh/?keyword=%2Bdenon+%2Bmanuals&msclkid=7df6682623ae12d6f4d035cf55d9e058

Denon Audio... | Answered on Dec 05, 2019

1 Answer

I have a denon April s470h receiver and was listening to it today on a low volume when all of a sudden the volume went to the max. Turned it off by the remote and a minute later the receiver turned back on at full volume, had to unplug. Has anyone had this problem?

usually happens if there is a stuck button. Could also be a component like a capacitor failing.

Denon Audio... | Answered on Nov 21, 2019

0 Answers

Want to clean head on Denon DRR-M30 - is it easier to remove casing?

Denon Audio... | Posted on Nov 06, 2019 | Be the first to answer

1 Answer

Hi! How do connect an equalizer to my Denon AVR-1803?

I find the best way to connect any equalizer is to connect via the tape monitor sockets, assuming that the AVR has one. From the equalizer in and out sockets - connect the Eq OUT to Tape IN on the AVR. And Eq IN to Tape OUT on the AVR.
Some AVR don't allow connections, due the equalizer interfering with Surround Sound systems. If you can connect switch off the equalizer when listening to Dolby or other surround formats, as it will spoil the sound.

Denon Audio... | Answered on Oct 12, 2019

1 Answer