20 Most Recent Gigabyte (GA-M61PME-S2) Motherboard - Page 7 Questions & Answers

are all the driver in and is there any power to board

Gigabyte... | Answered on Jun 24, 2014

You need to alter the video memory setting in BIOS. You can get to this by tapping F2 or Del during the boot sequence and then finding the setting within BIOS. Bear in mind that the amount of dedicated memory can only be altered within certain limits. Some motherboards - you don't give a model number - don't support more than 64Mb, others support 1Gb, depending upon board and amount of memory installed

Gigabyte... | Answered on Jun 10, 2014

Check power settings by opening control panel -> power options. Check when is the computer set to go to sleep and when to turn of the display. This might be caused by Windows power settings that put the computer to sleep to save power.

Gigabyte... | Answered on Jun 04, 2014

your video card going or your moitor is

Gigabyte... | Answered on May 23, 2014

you got to turn it on in the software

Gigabyte... | Answered on May 22, 2014


Gigabyte... | Answered on May 21, 2014

you can get software to do that

Gigabyte... | Answered on May 21, 2014

Check if UEFI is disabled after flash with newer BIOS version. If you flash BIOS the default settings gets loaded again. Check hard disk settings and boot settings.

Gigabyte... | Answered on May 20, 2014

get it at your motherboard web site under support then download there

Gigabyte... | Answered on May 14, 2014

check your manual for right ram

Gigabyte... | Answered on May 11, 2014

Any keyboard can be dismantled. Each one has its own configuration, however: Turn the keyboard over on its face with the back up. >Usually there are several inset screws (phillips head type) on the rear of the keyboard. Remove those. >There may be snaps (or not) additionally holding the cover on. Go carefully and see how they are holding. If you are lucky there are none. >Once the rear cover is removed, be VERY careful not to let the keys tumble out. It's a real bear trying to get them back in proper order again. You might try Youtube, just type your keyboard type in the search and see what pops up.

Gigabyte... | Answered on May 09, 2014

Hi amit,

Please change your RAM or unplug and plug it. I think your RAM is defective or not properly inserted in the memory slot.

I hope my solution may help you.
Thanks for using Fixya...;-)

Gigabyte... | Answered on May 06, 2014

Hi Orville,

Your problem is all about your motherboard you need to updated to BIOS firmware to solve your problem.

Go to the gigabyte website then go to your motherboard page and download and updated to the latest firmware for your bios.

Steps in flashing BIOS
How to Reflash Motherboard BIOS About updating BIOS... The whole BIOS updating procedure should be treated with extreme caution. If you do not encounter any system instability or bugs with the current BIOS version, we suggest that you keep it. If you determine to flash BIOS, you are taking a personal risk of BIOS flash failure. Please contact your supplier or our distributors/resellers for further remedy in case system crashes unfortunately because of BIOS flash failure. Before you begin... 1. Please make sure the BIOS version you want to flash matches your motherboard model. 2. If your BIOS is flash protected, please do not enable BIOS Flash Protection under Advanced CMOS Setup (AMI BIOS) or Advanced BIOS Features (AWARD BIOS) in BIOS menu. 3. Never interrupt when you BIOS is being updated. 4. Because BIOS flashing is potentially risky, if you do not encounter problems using the current version of BIOS, it is recommended that you not flash the BIOS. To flash the BIOS, do it with caution. Inadequate BIOS flashing may result in system malfunction. Three BIOS Flash Utilities... We provide three BIOS flash utilities at our website. Below are the overviews. 1 : flashbios_qflash.gif A BIOS flash utility embedded in Flash ROM. Not all motherboards have the Q-Flash, please use @BIOS or DOS flash utility to update BIOS if your motherboard does not have Q-Flash. Features-- With this utility, you only have to stay in the BIOS menu when you want to update BIOS. No need to enter DOS or O.S. mode. Caution-- Make sure you have a functional floppy disk with the correct BIOS version for your motherboard. UEFI - Download PDF User Guide pdf.gif Download PDF User Guide pdf.gif 2 : flashbios_atbios.gif A Windows-based BIOS live update utility. Features-- @BIOS helps you search for, download, and then update the latest BIOS in Windows operating system. Caution-- Make sure your O.S. environment is stable. UEFI - Download PDF User Guide pdf.gif Download PDF User Guide pdf.gif 3 : DOS Flash utility Features-- The flash utility is a combination of AMI and AWARD BIOS flash utility. You can use it with both AMI and AWARD BIOS. Caution-- Make sure you have a functional DOS boot disk with the correct BIOS version for your motherboard.

I hope my solution may help you.
Thanks for using Fixya...;-)

Gigabyte... | Answered on May 06, 2014

Not finding what you are looking for?
Gigabyte (GA-M61PME-S2) Motherboard Logo

4 questions posted

Ask a Question

Usually answered in minutes!

Top Gigabyte Computers & Internet Experts

Alun Cox

Level 3 Expert

2679 Answers

Tareq Bin Mostaq...
Tareq Bin Mostaq...

Level 3 Expert

1449 Answers


Level 3 Expert

13434 Answers

Are you a Gigabyte Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Gigabyte Computers & Internet

  • Gigabyte Computers & Internet

Most Popular Question

wiring connections

  • Computers & Internet