20 Most Recent Linksys Wireless-G WRT54G Router Questions & Answers


Control Panel->add or remove programs-> Intel(R) PROSet/Wireless Software -> Modify -> Unmarked WI-FI PROTECTED SETUP

Linksys... | Answered on Nov 25, 2019


Linksys router not support to work with landline.

Linksys router only can work with cable internet.

Linksys... | Answered on Nov 07, 2019


If you already have a cable router, then you don't want to use a wireless router. You will want to use a wireless access point instead.
The reason for this is that anything plugged-in to your cable router will not be able to access anything connected to the wireless router due to the NAT firewall in the wireless router.
If the wireless router has the option to make it a "Gateway", then that will fix this issue; otherwise, take the router back and buy a wireless access point instead.
As for how you hook up the wireless router to the cable router, you have to unplug the power cord of the cable router for about 15 minutes before hooking the Ethernet jack from it to the wireless router.
Once the 15 minutes have passed, you then can plug the Ethernet cable from the wireless router "WAN" port into an Ethernet port on the cable router and then plug-in the power cord of the cable router.
Once the cable router is finished syncing-up, the cable router should provide an IP address to the wireless router.
If you really have a cable modem instead of a cable router, then you won't have to put the wireless router into gateway mode.

Linksys... | Answered on Nov 02, 2019


Default user names:
  • Linksys BEFW11S4, WRT54G: admin
  • Linksys EtherFast Cable/DSL Ethernet routers: Administrator
  • Linksys Comcast routers: comcast
  • All other Linksys routers: [none]
Default passwords:
  • Linksys BEFW11S4: [none]
  • Linksys Comcast routers: 1234
  • All other Linksys routers: admin

Linksys... | Answered on Oct 27, 2019


Have you secured your Linksys from unauthorized access?
The encryption code protects your wireless router from unauthorized access. The wireless card in your computer/laptop needs to be configured with the router's encryption settings before the computer/laptop can access the router.
For details on configuring the wireless router and the wireless card, please click on this link and follow my instructions :-
http://www.fixya.com/support/r3559128-wireless_router_security

Linksys... | Answered on Oct 27, 2019


Unfortunately this model of router has no support for directly connecting anything other than a printer that already supports Ethernet.

Since that's not the case with most consumer printers you will need to buy a "Print Server" These are made by all the main manufacturers, and come with a collection of interfaces, USB / Parallel of the printer, and Ethernet or WiFi of the network side.

They all pretty much do the same thing so go for one that meets your needs.

If my advices was at least helpful, please vote for me!

Linksys... | Answered on Oct 27, 2019


here.
here.
NOTE: To learn how to access the web-based setup page on a Mac® computer, clickhere.
Step 2:
Click theAdministrationtab then click on theFactory Defaultssub-tab.

Step 3:
Under theFactory Defaultssection, click on theRestore Factory Defaultsbutton.

After resetting the router to its default settings, reconfigure it according to your Internet service. To learn how to reconfigure the Linksys router for Cable Internet connection, clickhere. If you have DSL connection, clickhere.
NOTE: The Power LED of the router will keep on blinking for a few seconds after resetting as it is still trying to stabilize. However, if the Power light still isn't solid after a minute, powercycle the router. For further steps on how to resolve this issue, clickhere.
here.
Step 1:
Access the router's web-based setup page. To learn how, clickhere.
NOTE: To learn how to access the web-based setup page on a Mac® computer,clickhere.
Step 2:
Click theAdministrationtab.

NOTE: The image may vary depending on the model number of the Linksys router.
Step 3:
Under theManagementsection, enter the new password in theRouter PasswordandRe-Enter to Confirmfields.

NOTE: You may use a combination of letters and numbers for your router password. Make sure that you take note of your router password so that you may have a back-up in case you forget it.
Step 4:
ClickSave Settings.
IMPORTANT: All the computers that are connected to the network will be using the new password when logging in to the router's web-based setup page.
The router's administrator User name and Password are different from the wireless network name (SSID) and passphrase of yourwireless network. If you want to know how to check the security settings of your network, clickhere.
If you are still having problems changing or resetting the router's administrative password
reset-2t2ggiperz2ruh1itdwalbur-5-0.png

Linksys... | Answered on Oct 27, 2019


I am providing you with two links from linksys. The fist link is the user guide, and the second is the quick installation guide. Between these two guides you should be able to set the router up with out any issue.

http://homedownloads.cisco.com/downloads/userguide/1224638367343/WRT54G-v1.1_ug.pdf
http://homedownloads.cisco.com/downloads/quickinstall/1224638367420/WRT54G-v1.1_qi.pdf

hope these help

Linksys... | Answered on Nov 22, 2018


You might be getting intermittent connection. What is the exact model and version of your router? check your firmware. It might need to be upgraded. =)

Linksys... | Answered on Sep 12, 2018


If you use DSL I would also check to make sure you are not being port blocked by your ISP. Some will block you if you exceed bandwidth on a particular port rather than throttling you or shutting you down entirely.

Linksys... | Answered on Sep 07, 2018


If the first solution did not help, try calling Linksys Tech support or try this http://technicalsupport.blog.friendster.com

Linksys... | Answered on Aug 29, 2018


Linksys Routers are one of the best Home wireless routers. it has good security feature and better wireless length. To change the Upnp setting on your router
follow these steps
Step 1 Open a web browser and type the IP address of the wireless router in the address bar (default is 192.168.0.1).Press Enter.
Step 2 The default username is admin (all lowercase) and the default password is blank (nothing). Click OK.
Step 3 Click the Tools tab then click Misc. to the left.
Step 4 Under the UPnP Settings section, select Enabled using the radio buttons to enable UPnP on the wirelessrouter, or select Disabled using the radio buttons to disable it.
Step 5 Click Apply and then click Continue to save the new settings.
Read more for setup linksys router
How To Setup Linksys Wireless Router In 5 Min Fixingblog com

Linksys... | Answered on Aug 28, 2018


Normal!

Wired connections are faster than equivalently wireless connections (from/to the same node) and so your
experienced is quite normal.

Additional nodes divide the original bandwidth and denigrate the performance, which is why one tries to
maximize the original bandwidth (speed in MHz) of the connection to the gateway.

You can maximize your experience by having critical systems wired to the router, and this also provides
greater security than any encryption (which is another brake on your speed) necessary for a wifi
connection.

Make sure you have the fastest possible wifi card in your portable devices to maximize your speed.

Linksys... | Answered on Jul 12, 2018


Hello
Try a different wall plug.If this does not bring the light to green the you probably need a new power cord.

Here is a link for your router.

http://homesupport.cisco.com/en-us/wireless/lbc/WRT54G2

Linksys... | Answered on Jul 10, 2018


It appears the connection between the Linksys and the modem is not working.
Try a different LAN cable.
Check the LAN cable from the modem to the Linksys, it should be connected to the WAN/Internet port on the Linksys.

Linksys... | Answered on Jul 05, 2018


After reformatting your dell 8400, did you reinstall all drivers of your devices? The linksys router won't be affected by the reformat. Your computer should still get connection from your router. This is a dell issue. If you have another computer connected and working with the router, that means the router is still functioning. Call Dell or linksys technical support. If they cannot help try this http://technicalsupport.blog.friendster.com

Linksys... | Answered on Jul 05, 2018


wat about the powerlight in the router....

Linksys... | Answered on May 18, 2018


Ethernet cable means CAT5 or UTP for others or LAN cable. The connection should be LAN port of your computer to LAN1 of your router.

And you can connect also the internet cable usually ethernet cable from your internet provider directly to (ethernet cable)WAN port of your router to get signal from your internet provider.

Also if you get this message, this could also means you still don't set up or configure the router's settings to communicate when your LAN and router. They must see each other to access the router's utility webpage.

Regards

Linksys... | Answered on May 18, 2018

Not finding what you are looking for?
Linksys Wireless-G WRT54G Router Logo

4,209 questions posted

Ask a Question

Usually answered in minutes!

Top Linksys Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2277 Answers

Ekse

Level 3 Expert

13434 Answers

Mike

Level 3 Expert

4363 Answers

Are you a Linksys Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Linksys Computers & Internet

  • Linksys Computers & Internet

Most Popular Question

reset password

  • Computers & Internet
Loading...