20 Most Recent Kyocera FSC2126MFP AllInOne Laser Printer - Page 2 Questions & Answers

get it service by the technician
the cost is tax deductible and will be fixed

Kyocera FS... | Answered on Jul 15, 2016

What model of kyocera

Kyocera FS... | Answered on Jun 15, 2016

depending where you are in the world it might be call service
in the user book the trouble shooting section
just about every fault shown says call service
hand book ..68 pages
trouble shooting starts at 47

Kyocera FS... | Answered on May 20, 2016

You may have gotten an incorrect message and removing and replacing the drum is a step in right direction. But if you continue to get the same message I am afraid you will have to replace the drum - they do wear out.

Kyocera FS... | Answered on Aug 19, 2015

cleaning with cloth and brasso

Kyocera FS... | Answered on Jul 08, 2015

Can be many things usually it drum decay and the drum unit or the charger unit maybe needing replaced

Kyocera FS... | Answered on Mar 16, 2015

assuming the toner coverage per print isnt excessive , the problem could be any of the following,
toner - have you used 3rd party toner ( compatibles, remanufactured) - if yes - you could have put the developer toner ratio out of spec- fix by replacing developer tank AND toner.
if no - is there any blockage in the toner transfer pipe between toner cartridge and developer tank/ is the pipe split leaking toner if all looks ok , test the toner pump using the service commands., if toner is moving ok the problem must lie in the dev tank - the fix is still to replace the dev tank - good news is its plug and play comes with instructions on fitting and setting up .

Kyocera FS... | Answered on Feb 10, 2015

Kyocera compatible does not mean Kyocera genuine. Not using genuine toner can invalidate your warranty. If that doesn't bother you then the printer detecting a non-genuine cartridge is not an issue.

Kyocera FS... | Answered on Feb 05, 2015

laser unit

Kyocera FS... | Answered on Dec 05, 2014

check if auto rotation is on or off

Kyocera FS... | Answered on Nov 25, 2014

open the back of the machine two screws hold it in

Kyocera FS... | Answered on Nov 25, 2014

look for the trigger that hits the switch to tell the machine it is close usally i thin long piece of plastic

Kyocera FS... | Answered on Nov 25, 2014

You can connect the printer with a parallel cable, open cmd and type
echo !R! FPLC 0; EXIT;>lpt1.

Kyocera FS... | Answered on Oct 11, 2014

This is a machine serialnumber mismatch between to EEprom's

Kyocera FS... | Answered on Oct 02, 2014

Fax board problem

Kyocera FS... | Answered on Sep 30, 2014

could be a number of things but could be the dv unit.

Kyocera FS... | Answered on Sep 30, 2014

Not finding what you are looking for?
Kyocera FSC2126MFP AllInOne Laser Printer Logo

16 questions posted

Ask a Question

Usually answered in minutes!

Top Kyocera Office Equipment & Supplies Experts

Tareq Bin Mostaq...
Tareq Bin Mostaq...

Level 3 Expert

1449 Answers


Level 3 Expert

1363 Answers


Level 3 Expert

85222 Answers

Are you a Kyocera Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

FS Kyocera

  • FS Kyocera

Most Popular Question

error message read close rear cover 1

  • Office Equipment & Supplies