20 Most Recent Kyocera FSC2126MFP AllInOne Laser Printer - Page 3 Questions & Answers


Upgrade your firmware on the machine (a tech will need to do that) and download the latest KX driver from kyocera support

Kyocera FS... | Answered on Sep 30, 2014


As an error, the C-4200, refers to laser unit. Sometimes the main charge (mc) cause this error. Remove the mc and check the sound of the laser. If you don' t hear the laser sound, then the problem is the laser unit

Kyocera FS... | Answered on Sep 28, 2014


go into service mode and print out the maintenance sheet and look for the ucode for factory reset

Kyocera FS... | Answered on Aug 11, 2014


I don't recommend cleaning a waste toner bottle but if you do just pull it out and empty the toner out its very messy for don't wear anything you don't want to get dirty

Kyocera FS... | Answered on Aug 11, 2014


fax your cell phone the number that calls up is the fax number

Kyocera FS... | Answered on Aug 06, 2014


it could be the drums are bad print the color test pages and see what the colors look like if there bad replace the drums for the colors that are bad

Kyocera FS... | Answered on Aug 06, 2014


The Date/Time settings in FS-3640MFP is in the system menu. Press the system menu/counter key, find (inside the menu) the System and then the Date/Time and change whatever you want. The login usernane and login password is 4000.

Kyocera FS... | Answered on Jul 22, 2014


This service code means that the waste toner reservoir inside the drum unit is full and that the printer has printed over 100.000 pages.

Kyocera FS... | Answered on Jul 22, 2014


Unfortunately, you cannot reset the page counter on any kyocera printer. Unless you have an eeprom reader with the appropriate software.

Kyocera FS... | Answered on Jul 22, 2014


When you are in ready state, type 10871087 to enter the maintenance mode. Then type 251 to go in the section where clean the MK counter. (U251 Checking/clearing the maintenance count). Press Start to reset (if I remember correctly , you will need to type a new counter (000000), not just to clear the old one). After reset, you press Stop key to exit the submenu. Type 001 and press Start to exit the Maintenance mode.

Kyocera FS... | Answered on Jun 02, 2014


Hello, Power down the unit.Unplug power from wall. Power back up, if the error still happens, there is a small piece of paper somewhere, take toner out and look, or pull down back cover and look in there.

Kyocera FS... | Answered on Jun 01, 2014


error c3100 is a scanner problem, try cleaning and lightly oiling
scanner rails, if this does not help may be scanner motor or pcb.
also check if scanner shipping lock is pushed on

Kyocera FS... | Answered on May 09, 2014


SEE AT THE BACK SIDE OF THE MACHINE

Kyocera FS... | Answered on Mar 22, 2014

Not finding what you are looking for?
Kyocera FSC2126MFP AllInOne Laser Printer Logo

16 questions posted

Ask a Question

Usually answered in minutes!

Top Kyocera Office Equipment & Supplies Experts

Tareq Bin Mostaq...
Tareq Bin Mostaq...

Level 3 Expert

1449 Answers

CheckitRight
CheckitRight

Level 3 Expert

1363 Answers

Marvin
Marvin

Level 3 Expert

85222 Answers

Are you a Kyocera Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

FS Kyocera

  • FS Kyocera

Most Popular Question

error message read close rear cover 1

  • Office Equipment & Supplies
Loading...