20 Most Recent Biostar N68S3B GeForce Barebones Kit Questions & Answers


you will have to open up your network connections

click start control panel network connections this may vary depending on your operating system look for local area connection if you see a red x or a yellow exclamation or question mark ! ? you will need to update or install the driver or it could be firewalled

If you are trying to connect through a modem/router you it should have come with a disk then
you might have to connect the usb lead to your modem to get a connection then

click start control panel administration tools computer management device manager scroll to network adapters should see a yellow question / exclamation mark ? ! or a red X right click install drivers

the driver might be on the disc supplied by your ISP internet service provider
or the motherboard disc

click start type cmd press enter you will be in DOS mode

type in ipconfig press enter

you will see all o fyour internet connection details type in your default gateway adress into your internet search should read something like 10.0.0.138

Make sure you Ethernet/internet is enabled in bios restart your computer during the boot up process you will see on your screen a certain key usually the Delete or the F2 key to press to enter set up (BIOS) press and hold that key to enter bios using arrow keys navigate to integrated peripherals look for SiS On Chip Pci Device press enter scroll to SiS 10/100m press enter make sure its enabledimake sure its enabledPci device arrows key scroll to nstalled.

hope this helps

Biostar N68S3B... | Answered on Oct 09, 2012


Biostar motherboards have a 1 year warranty and require proof of purchase.

http://www.biostar-usa.com/app/en-us/support/rma.php

Biostar... | Answered on Aug 19, 2019


if you have an internet access... use windows update

Biostar... | Answered on Mar 26, 2019


Try another mobo or another set of ram figure out which is bad

Biostar... | Answered on Mar 18, 2019


Find drivers with 3Dp chip Software

http://www.3dpchip.com/3dpchip/sub/chip_eng.html

Biostar... | Answered on Jul 17, 2017


Not sure how u shorted it out installing ram. Theres only 1 way the put it in and there should have been NO power on the board at the time. AND I'd like to know how you think the board is shorted out. What is happening? It's a very rare occurrence and there are other easy fix issues that might make a person think the board is fried. Let me know your answers to these questions so I can help further.

Biostar... | Answered on Apr 13, 2017


clone the bios from the website of biostar

Biostar... | Answered on Jan 29, 2016


No, Biostar advertises that you should use low voltage memory on this board. My experience that when 1.5 volt memory is installed in a 1.35 volt system, it is not reliable. (Intermittent Crashes.)
You would have to increase the memory voltage, this is only possible on full blown gaming motherboards designed for overclocking the memory.
A j1900NH2 supports S states, but it does not support memory overclocking.

Biostar... | Answered on Dec 22, 2015


No, Biostar advertises that you should use low voltage memory on this board. My experience that when 1.5 volt memory is installed in a 1.35 volt system, it is not reliable. (Intermittent Crashes.)

Biostar... | Answered on Dec 22, 2015


many things enter into your problem . memory size is the biggest no doubt .

Biostar... | Answered on Aug 17, 2015


See the manual:

ftp://ftp.biostar-usa.com/manuals/M7VIG%20400/M7VIG400manual.pdf

Page nr. 9 you cane see JPANEL1 pin assignement.

Biostar... | Answered on Mar 30, 2015


Some idea of your question would be good

Biostar... | Answered on Feb 10, 2015


Without you describing the problem it's impossible to suggest solutions, except purchasing another board. 6 months is a lot of time. I would get rid of this motherboard an bought another brand ( Gigabye, Asus are excellent brand names).

Biostar... | Answered on Jan 24, 2015


Hi
I went to the download drivers page of the BioStar website for your mobo here:
N68S3B
and the VGA driver for Vista and Windows 7 is the same one 8.15.11.8634 (the "x86" indicates 32-bit, but the driver looks to be the same for both 32 & 64 bit).
Your question about the AMD Athlon can be answered quite easily. It is a CPU and does not need any specific driver. You should however download and install the chipset drivers for the mobo.
Hope this is helpful, if so would you please register that with Fixya
Cheers

Biostar... | Answered on Dec 24, 2014


Does it say after boot up I'm guessing u need to install display drivers but if that doesn't work give me more info please

Biostar... | Answered on Sep 07, 2014


You posted a motherbord name, but no question

Biostar... | Answered on Sep 04, 2014

Not finding what you are looking for?
Biostar N68S3B GeForce Barebones Kit Logo

2 questions posted

Ask a Question

Usually answered in minutes!

Top Biostar Computers & Internet Experts

Jayburt

Level 2 Expert

89 Answers

Ekse

Level 3 Expert

13434 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Are you a Biostar Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Biostar Computers & Internet

  • Biostar Computers & Internet

Most Popular Question

eneble visualization

  • Computers & Internet
Loading...