20 Most Recent
Questions & Answers
The camera takes too long to take a photo.
Press the shutter button halfway and hold it to set the focus, then press it the rest of the way down to take a photo. If you press the shutter button down all the way at once, it takes time to focus and set the exposure before the shutter releases. It may take longer than when pressing the shutter button in two steps.
on Sep 12, 2005
I have an old Epson
It's ancient, worthless and totally obsolete. Spare parts will be impossible to obtain. Repairs will be completely uneconomical if you have to pay for them in any way (parts or labour).
In short, you have absolutely nothing to lose by trying a DIY repair, and even if it fails (highly likely) you gain valuable experience for when you next attempt such a repair.
BTW: the Epson 850z is not an SLR. The optical viewfinder does not take it's image from the same lens used to take the picture.
on Jul 15, 2011
NO. THE PROBLEM IS THAT THE SWITCH CANNOT TURN ON
There may be many possibilities that can cause this.Here is what you can check:
Initially remove the battery and reinsert it again and check if it works.also try using other battery if you feel battery might have gone faulty.
Also possible that the switch may hve gone faulty or the internal connection to switch is loosened up.
Open the device and check if the switch is internally stuck.if the connections are faulty,Just resolder the connections properly and try again.if the switch looks damaged or faulty internally.Replace the switch.
thanks and please do not forget to accept the solution
on Apr 27, 2009
Need a driver
why do you need the drivers for by the way? is it for transferring picture / videos from the camera to your computer?
olympus did not create drivers for the device but only the application to manage the media. looking forward to your reply.
on Apr 20, 2009
Not finding what you are looking for?