20 Most Recent
Questions & Answers
Unknown Card in Socket 1
This issue may be sorted by reloading the operative syste, It seems that the platform files are corrupt and so the terminal does not recognise the radio card because it has no drivers for it.
on Oct 26, 2012
Cannot turn off flight mode
Cannot turn off flight mode on an MC50 so it will not transmit to my wireless network
Ekse: I see your having issues with your Symbol MC50 pocket pc / phone? the flightmode is stuck on?
Ekse: are you there?
Ekse: I guess you are not there but I think I can solve this problem and hopefully you will see my comments at some point
Read more Ekse: First you should try performing a normal reset
Ekse: there is the small reset button on the back of the unit. perform the normal reset and see if the problem persists
Ekse: if the problem persists back up any data from the phone to your computer, and then perform a hard reset, Howl down the power and right scan buttons, then press and release the reset, and then let go of the power and right scan buttons.
Ekse: the hard reset wipes the handheld and returns it to factory defaults, you will be online after the hard reset. then just restore your data from your desktop computer and your good to go.
Ekse: if you need further assistance you can reach me on email - or on the website.
on Jul 24, 2012
Align screen thats all it says
Cold boot the scanner with the three finger contortion. Power Button, right scan button and the reset button at the same time. Wait for it to reboot. If it doesn't reboot, you haven't done it right. Redo it. Then if it comes up and keeps saying align you may have to hit the reset only button and wait for it to warm boot.
on May 17, 2011
I have 2 units of MC50, I connect to my WiFi ,
Based on the Information you have provided we can assume that either,
- You need to update your firmware and/or browser through the included update software
- Both units have been damaged in different ways, most likely the memory as browsers on pocket PCs are notorious for freezing like this when they run out of memory.
dIf updating the software on your phones does not work you will have to bring them in to a specialist to hto see which of the internal parts has been damaged.
on Mar 15, 2011
Not finding what you are looking for?