20 Most Recent Digihome LCD TV Questions & Answers

Try download a converter on the USB storage it's the tv it can't read the file

Digihome LCD TV | Answered on Nov 30, 2019

Hey Noel, that is just a T-com board problem. Replace the T-com board.

Digihome LCD TV | Answered on Aug 20, 2019

is this happened either watching a tv channel or even watching dvd movies?. and then does the display only white screen or a totally black screen?.

Digihome LCD TV | Answered on Jun 17, 2019

Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.
In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.
Before going further; try a hard reset first. If it does not help you, replace the main digital board. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; visit the site linked here.

Digihome LCD TV | Answered on Sep 16, 2016

Go to digihome support to get the Manuel

Digihome LCD TV | Answered on Aug 26, 2016

Yes your player has gone into a wrong region make sure that if your tv is pal it must be pal NTSC will also make it go black and white check tv input and DVD player settings

Digihome LCD TV | Answered on Aug 26, 2016

You probly got the button wet you will havev to try use a hair dryer in the eges and blow it dry or you have poped a fuse pop the back of look for a glass tube fuse it's only 1cm big it could also be white just check it will cost about 1 dollar for the fuse

Digihome LCD TV | Answered on Aug 26, 2016

There might be someone around you with a similar tv or do you have a other one in the house some people use remote blasters and that can also transmit a far distance just close the ir in front of the tv

Digihome LCD TV | Answered on Aug 26, 2016

Sure are you using a preamp component system or do you want to play it on the tv if you do have a pre amp run the RCA cables to sterio input on amp or aux then in the setting of the amp go into sound and put the aux to 6.1 also remember that to use audio out on your tv

Digihome LCD TV | Answered on Aug 26, 2016

In setting you must be in user not auto then swop from 2 to 3 d

Digihome LCD TV | Answered on Aug 26, 2016

return for replacement or repair if try to repair or tinker with will void any warranty or return policy

Digihome LCD TV | Answered on Aug 16, 2016

Because the format of the video is invalid or unsupported by the video player.

Digihome LCD TV | Answered on Jun 07, 2016

Mine is the same, i think it is because it is in analogue mode and I can't switch it back. Did you get anywhere?

Digihome LCD TV | Answered on Feb 15, 2016

Not finding what you are looking for?
Digihome LCD TV Logo

158 questions posted

Ask a Question

Usually answered in minutes!

Top Digihome Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76204 Answers

john h

Level 3 Expert

22486 Answers

David Hoff

Level 2 Expert

122 Answers

Are you a Digihome Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Digihome Televison & Video

  • Digihome Televison & Video

Most Popular Question

digihome 40 led tv model 40272smt2 fhd

  • Televison & Video