Top 20 Dell TrueMobile 2300 Wireless Broadband Router (TM23001) Questions & Answers


You don't, your router logs your activity for you.
You can read the logs b going into the management section of the router.

Dell TrueMobile... | 64 views | 0 helpful votes


some routers dont have wps button but if you need to reset router To restart the Dell TrueMobile 2300 Wireless Broadband Router, unplug the power connector and plug it back in.

To load the Dell TrueMobile 2300 Wireless Broadband Router's default settings, hold down the reset button on the router for at least five seconds. While the unit resets, the Power light blinks.

Dell TrueMobile... | 141 views | 0 helpful votes


These are the two options for your Router. Don't forget to save your settings

WPA is an upgrade to the WEP (Wired Equivalent Privacy) standard for securing your wireless network. If you would like to secure your wireless network using WPA, you will need the following:

  • WPA enabled on your Dell TrueMobile 2300 Wireless Broadband Router

  • WPA support for your wireless clients. If you are using a Dell TrueMobile wireless client, you can check for the availability of WPA enabled software update for your wireless client at http://support.dell.com.


  1. Log into the Web configuration of your router at http://my.router (or the default address http://192.168.2.1)
  2. Click on Basic Settings.
  3. Click on Wireless Security.
  4. Click on the Enable Wireless Security checkbox.
  5. Select either WEP or WPA in the Network Authentication list.




To setup WPA
  1. Enter your pre-shared key. This key must match the key that is used by each wireless client computer associated to your router.
  2. Choose a key format. This can be hexadecimal digits (0-9, A-F) or ASCII characters (any key on the keyboard).
  3. WPA Group Rekey Interval specifies how often the key rotates or changes.
  4. WPA Encryption allows you to select 1 of 2 possible encryption methods (TKIP and AES) - choose one that your wireless clients supports.
  5. Click NEXT, then Save and Restart to apply the changes.
  6. Setup the WPA on your wireless clients. Refer to the documentation that accompanied your wireless clients, or your wireless clients on-line help system for information on how to setup WPA.

Dell TrueMobile... | 172 views | 0 helpful votes


Yes there is, you can buy a wireless range extender/booster like DAP-1360 WIRELESS N RANGE EXTENDER http://www.dlink.com/DAP-1360

Dell TrueMobile... | 392 views | 0 helpful votes


For that you need to enable DHCP on router also enable wireless on router. You need to configure your router with below method. Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. If you are still not able to access router with above ip then you need to RESET it for that press RESET button for 10 seconds it is in back side of router then all settings defaults..Then you can access it with above method. Then set WAN settings as internet service provider settings enable DHCP. .Click on wireless and enabled it. Then click on wireless->wireless security->WEP security there is code password note down it or enter new password then save setting s and restart router. then you can connect wireless with new password. Let me know if you need further assistance. Thanks for using FixYa.

Dell TrueMobile... | 81 views | 0 helpful votes


The router does not need to be loaded onto the system. What is the exact problem you are having?

Dell TrueMobile... | 30 views | 0 helpful votes


The wireless router most likely has been configured with WEP or WPA or WPA2 encryption key.
Unless you configure the wireless card in your computer with the router's encryption key the computer cannot connect to the router by wireless.

To secure your wireless network from unauthorized access,please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Dell TrueMobile... | 64 views | 0 helpful votes


not you need to ajust the range

Dell TrueMobile... | 25 views | 0 helpful votes


should not effect hard wired desktop

Dell TrueMobile... | 55 views | 0 helpful votes


with verizon, you need to set the modem to full bridged mode so that the connection from your modem will be opened. This certain firewall is called NAT. Your modem and your router has this feature. To disable NAT on your modem, you need to set it to full bridged mode. To disable the NAT on your router, you need to open ports on your router.

You need to open this port on the router for Xbox live to work
TCP: 80, 3074, 53



UDP: 88, 3074

forward it to the ip of your Xbox.

this should set the NAT on your xbox to open, not moderate.

Dell TrueMobile... | 226 views | 0 helpful votes


You can download the manual from the Dell WEB site. Please click on this link to download the manual :-
http://support.dell.com/support/edocs/network/p57205/en/index.htm

Dell TrueMobile... | 30 views | 0 helpful votes


PS3 and Xbox ( NON BELKIN)

You Will Have to Disable the Firewall In Your modem / Router

And IF it is a router then Open The Ports

• TCP 80
• UDP 88
• UDP 3074
• TCP 3074
• UDP 53
• TCP 53

And also make sure that UPnP is Enabled

Dell TrueMobile... | 120 views | 0 helpful votes


. you will need the "airport " networking gear
2. If you have a base station you need to connect this to your router or modem with an Ethernet cord ( RJ45)
3. Connect the base to the MAC pc Ethernet port.
4.connect the base station power and look for the power light to go on.
5.Open MAC applications folder then the "utilities " sub folder.
6. Double click the "airport utility icon"
7. Base station on the left of the screen ( click) then choose "continue".
8. if not on the left of the screen then select "setup a new station" then click "continue .
9. enter password for the base station ( write it down) keep it . click "continue".
10. next select create and new wireless network
11. create a name for the connection
12. then select "WPA" for the security then type in a password
13Next .make a selection for either a router or modem the click "continue.
14. next select DHCP the click continue
15.Verified then click "continue" then wait for the restart of the base station.
16. You should see "congratulations" then click "quit"

Dell TrueMobile... | 136 views | 0 helpful votes


Reset your router then configure it with below method. Press RESET button for 10 seconds it is in back side of router. Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. Then configure wan settings and lan settings enable wireless if you want to use wifi . Let me know if you need further assistance. Thanks for using FixYa.

Dell TrueMobile... | 74 views | 0 helpful votes


You Will Have to Disable the Firewall In Your modem / Router

And IF it is a router then Open The Ports

• TCP 80
• UDP 88
• UDP 3074
• TCP 3074
• UDP 53
• TCP 53


And also make sure that UPnP is enabled

Dell TrueMobile... | 98 views | 0 helpful votes


Dear Friend,
You must be trying the WEP -OPEN.
try WPA-PSK and put in your customized password.
Before making any changes in the system remove all the cables from the router and reset the router once and try to configure the network with WPA- PSK.
It should work.
If negative plz contact your ISP

Thank You

Prasanth83

Dell TrueMobile... | 423 views | 1 helpful votes


Is there any computer connected to the router ?
If not then you will need to connect the computer to the router.
Do not change any wireless settings on the router with the wireless computer.
you will need to connect the computer to the router with the Ethernet cable.
check the IP address of the computer.
open the router set up page of the router.
Here you can change the wireless settings of the router.
Now once you change the network anme and security on the router, you will need to connect to the wireless network on your wireless computers.
Click Here for step by step instructions

Dell TrueMobile... | 163 views | 0 helpful votes


both the dsl box and the router must be configured to work with each other.

ask your internet service provider on how to turn the dsl box into a regular modem as most are hybrid modem-routers.

Dell TrueMobile... | 187 views | 0 helpful votes


Access the router's built-in web-interface, and access the router's web-page where you "enabled" the port-forwarding. Then, "remove" or "delete" the settings.
Then, access the router's web-page that defines which of your computers/XBOX is to be placed into the 'DMZ' ("De-Militarized-Zone"). Put your XBOX, not your desktop, into the 'DMZ', to allow it "full" access to the Internet, i.e., bypassing the protection of the "firewall" that is inside your router.


Dell TrueMobile... | 91 views | 0 helpful votes

Not finding what you are looking for?
Dell TrueMobile 2300 Wireless Broadband Router (TM23001) Logo

81 questions posted

Ask a Question

Usually answered in minutes!

Top Dell Computers & Internet Experts

Ekse

Level 3 Expert

13434 Answers

Alun Cox

Level 3 Expert

2679 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Are you a Dell Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Dell Computers & Internet

  • Dell Computers & Internet

Most Popular Question

entered wep encryption key onto dell

  • Computers & Internet
Loading...