20 Most Recent D-Link DI 514 Wireless Router (DI-514) Questions & Answers


kill stuff and wood cut and mine lol best way to get rs money next time dont spam.....

D-Link DI 514... | Answered on Nov 04, 2019


try with
http://192.168.15.1
or http://192.168.0.1

or if u still not access u have to reset it.
reset button is in back side of router press it for 10 seconds.then it reset to daults.

D-Link DI 514... | Answered on Oct 18, 2019


Are You Looking For Dlink Phone Support Or Chat Support?
If You then keep Reading the Post till Last And Know How to Contact dlink customer service. We will reveal all simple ways to contact Dlink Customer service. Typically d-link provides Full Support for 30 Days From the date of purchase but if you register the product with them right after you Buy the Dlink Than it Can be extended up to 90 Days ( 3 Months)Free Support & Warranty.
https://wirelessrouterexpert.com/customer-support/contact-dlink-tech-support

D-Link DI 514... | Answered on Aug 28, 2018


moz-screenshot-1.pngmoz-screenshot-2.png1. Login to router first and verify that the router status via the rj45 cable (ethernet).

D-Link DI 514... | Answered on Aug 16, 2018


I would suggest that you go through this guide, it will explain you every step which you need to make to get your modem and internet connection back on track:
The ultimate Link Troubleshoot guide: Problems. solutions, PDF manuals

D-Link DI 514... | Answered on Jun 24, 2018


is this adapter?? i think their is no fuse in wireless router.....


If you need any kind of technical assistance you can contact support cell at http://www.vtechsquad.com/

D-Link DI 514... | Answered on Apr 21, 2018


I would suggest downloading the manual and check the settings for your country.. it can be found here.
http://support.dlink.com/emulators/di524_revc/h_lan.html

D-Link DI 514... | Answered on Oct 25, 2017


You reset the D-Link back to the factory default by - Press the RESET button at the back of the wireless router when it is powered up. Holt the RESET button foe at least 5 secs until the LEDs flash and then release the RESET button.
You can then configure the D-Link as follows ;-
To set-up and secure the wireless router from unauthorized access, follow these steps: -
1. Connect the wireless router to your computer with a LAN cable.
2. Start your browser and enter the router's configuration URL IP address.
3. Enter the router setup, login and password
4. Change the admin password
5. Go to the wireless settings and change the default SSID and turn off SSID broadcast.
6. Setup encryption key the strongest is WPA2 (if not then WPA).
7. For further security measures - turn on MAC address filtering and enter the MAC address of the wireless cards on the computer/s you want to connect to this wireless router.
8. Record the settings you have made and keep it in a safe place and Save the settings.
9. Configure the wireless cards on the computer/s with the SSID and encryption settings of the router.
10. Remove the LAN cable between the router and the computer then the computers should be able to connect to the router wirelessly.

D-Link DI 514... | Answered on May 31, 2017


when we forgot all.so from which purpose we can reset the router password i want the solution urgently.

D-Link DI 514... | Answered on Apr 28, 2017


Excellent.

D-Link DI 514... | Answered on Feb 27, 2017


Is this a wireless connection? Make certain the router is transmit is turn ON and on high power. Make certain your laptop WiFi is turned on. Use the network connection to connector to the router.

D-Link DI 514... | Answered on Jan 07, 2017


default is ADMIN and password is blank

D-Link DI 514... | Answered on Jan 07, 2017


Using your browser login into you router and go to the wireless section. There you can set or change the password. You can also use the set-up wizard to do this set-up.

D-Link DI 514... | Answered on Jan 06, 2017


Usually you can login on your browser to you router and go to the management section to check for firmware updates and select that button and it will download and install the firmware. On some models, you have to go to the D-link web site and look for firmware updates for your router. Always check what you current firmware you have installed and check the version of you router modem (A, B, C etc). Then you can manually download the firmware (usually in a ZIP file), open the zip file, and then using your browser connected to the router look for Update Firmware. You will have to go to where (folder) you saved the downloaded update and select that file. It is recommended that you update using a LAN connection and not a wireless connection.

D-Link DI 514... | Answered on Jan 06, 2017


i recently reformatted my brother's dell computer. I reinstalled windows xp and all the drivers i was using the internet on it by networking it with my wireless dsl service and it was working fine. when i took it to his house i tried installing the quest service with the provided cd disk an it came upon this error message "attempts to ping the modem IP address (192.168.0.1) have failed (error code: QC4010) and cannot conect to internet. called customer service and they told me that i was missing my local area connection file. that i needed to install it. does anyone know how to do this
visit the CBR Tech Solutions

D-Link DI 514... | Answered on Nov 10, 2015


Connect your modem to the WAN/Internet port of the DLink router and power cycle both devices. Test to see if you have internet.

D-Link DI 514... | Answered on Aug 24, 2015


please see the Dlink setup wizard.

http://www.wikihow.com/Setup-D-Link-WBR-2310-Wireless-Router

D-Link DI 514... | Answered on Oct 05, 2014


You have to tell your PC what the new password is.
In Windows: Open Network and Sharing Center by clicking the Start button, and then clicking Control Panel. In the search box, type network, and then click Network and Sharing Center.
Click Set up a new connection or network.
Click Manually connect to a wireless network, and then click Next.
On the Enter information for the wireless network you want to add page, under Security type, select WEP.
Complete the rest of the page, and then click Next.
Click Change connection settings.
Click the Security tab, and then, under Security type, click Shared.
Click OK, and then click Close.

D-Link DI 514... | Answered on Aug 14, 2014

Not finding what you are looking for?
D-Link DI 514 Wireless Router (DI-514) Logo

719 questions posted

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2277 Answers

Ekse

Level 3 Expert

13434 Answers

Mike

Level 3 Expert

4363 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

D-Link Computers & Internet

  • D-Link Computers & Internet

Most Popular Question

access dlink wifi router because

  • Computers & Internet
Loading...