20 Most Recent Samsung ML 2010 Laser Printer Questions & Answers


This is likely to be a software\driver problem so you should try uninstalling the printer and then reinstalling it. You should, of course, download the latest drivers from Samsung.

Samsung ML 2010... | Answered on Dec 02, 2019


Go here and you will get your driver.

http://www.samsung.com/ca/support/download/supportDown.do?type=printermultifunction&type_cd=06010000&subtype=monochrome+laser&subtype_cd=monochromelaser&model_nm=ML-2010&mType=DR&vType=L&prd_ia_cd=06010400&disp_nm=ML-2010

Samsung ML 2010... | Answered on Sep 30, 2019


Here is the link for the windows driver for your printer.  http://printers.free-driver-download.com/Samsung/14072/Samsung-ML-1450-Printer-Driver-Windows.html
If this helped you please rate, thanks!

Samsung ML 2010... | Answered on Sep 19, 2019


Hi, If the HDD still spins up then you may be able to plug it in to another computer as a secondary and then either be able to view and copy the data straight from there ir if it unaccessible in normal ways there is software that will be able to view and copy off most of your data.

If the HDD is stuck or jammed and does not spin then unfortunately there is not much chance of getting anything.

Let me know how you go
SeaJade

Samsung ML 2010... | Answered on May 14, 2019


Hi,
I noticed that the orange cancel button was jammed down. I couldn't prise it up, but was able to release it by tapping firmly the top of the printer near the button. As soon as it popped up - the buttons stopped flashing

Samsung ML 2010... | Answered on May 06, 2019


I resolved this problem by re-installing the 2.00 driver from http://www.samsung.com/us/support/downloads/ML-2010.

Samsung ML 2010... | Answered on Mar 15, 2019


i found it here:

http://www.samsung.com/us/support/detail/supportPrdDetail.do?menu=SP01&prd_ia_cd=&prd_mdl_cd=&prd_mdl_name=ML-2010

Make sure to look for the little "driver" tab if all you see is the guides.

It's hard to see.


Samsung ML 2010... | Answered on Jan 15, 2019


All can be found here
http://www.samsung.com/uk/support/detail/supportPrdDetail.do?menu=SP01&prd_mdl_name=ML-2010

Samsung ML 2010... | Answered on Dec 10, 2018


Have you tried going on to samsung website and seeing if you can download the driver there. Failing that google samsung 2010 printer driver and it may give you other places to download from..... I have a scanner but no driver and this is how i solved my problem :0)

Samsung ML 2010... | Answered on Dec 04, 2018


Yes, is the same cartidge.

Samsung ML 2010... | Answered on Nov 27, 2018


i want driver of ml2010

Samsung ML 2010... | Answered on Oct 29, 2018


This is a step-by-step process for replacing the tire (roller). Thanks to dizzyzuma for helping me get the right part and get the procedure down.

1: You will need to manually shut off the printer in the middle of printing in order to release the tabs. Put in a few sheets of junk paper and print a few blank documents. You want to shut off the printer using the switch in the back when the roller is approximately in this position:

947bd5c.jpg

2: Hold the down the two side tabs that are locking the tire into place and press down on the tire with your finger. It should pop off relatively easily.

718b19a.jpg

3: Turn the printer back on. The tire will rotate around to its starting position, but it will now be unlocked. Turn the printer back off.

a19005f.jpg

4: Rotate the tire towards you and unhook the two bottom hinges. It should come off without much force.

3f62dcd.jpg

ee4ae7f.jpg

5: Replace the old tire with the new tire.

20c0d09.jpg

6: Re-insert the tire onto one of the bottom hinges and rotate it around so that both of the bottom hinges (tabs) are in.

8e0c4f5.jpg

7: While holding the back of the metal bar with your fingers for leverage, press firmly with your thumb to snap the tire back into place.

71bcc76.jpg

8: Turn back on the print. You’re good to go.

Samsung ML 2010... | Answered on May 26, 2018


my ml 2010 never has printed as dark in the centre of the page even when the toner is full?

Samsung ML 2010... | Answered on Apr 22, 2018


Hi
It maybe one of the fuse gone.

You have to change the fuse:
The fuse is 250mAh and 3/4" inch long (20 mm) round glass with metal ends. The electrical contacts are not in the cartridge but inside the printer: There is a plastic fuse holder on the cartridge, even the starter cartridge. You just simply pop it into the holder. This will stop the flashing red LED and the system tray will say the cartridge is full.

All The Best: Pineworks

Samsung ML 2010... | Answered on Mar 22, 2018


not a memory problem as it prints
the problem will be in the spooling settings as it determines if it has to wait for more data to print or what to happen
try going to the printer properties and settings and seeing about spooling and queueing times

Samsung ML 2010... | Answered on Feb 21, 2018


Derek Kwaku Asamoah box mc 279 Takoradi. Please am using your product "samsung ml-2250 printer" and the problem is that the online/erro light is on. thank you for your co-operation and i hope to hear from you soon.

Samsung ML 2010... | Answered on Nov 13, 2016

Not finding what you are looking for?
Samsung ML 2010 Laser Printer Logo

512 questions posted

Ask a Question

Usually answered in minutes!

Top Samsung Office Equipment & Supplies Experts

CheckitRight
CheckitRight

Level 3 Expert

1363 Answers

Tareq Bin Mostaq...
Tareq Bin Mostaq...

Level 3 Expert

1449 Answers

jasbo
jasbo

Level 3 Expert

2239 Answers

Are you a Samsung Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

ML Samsung

  • ML Samsung

Most Popular Question

internal error false

  • Office Equipment & Supplies
Loading...