20 Most Recent
Questions & Answers
Error message says reset PCU correctly
You get this message because the PCU isn't seated properly.
This is a link for the user manual for this printer:
On page 13 shows a diagram that indicates the photoconductor unit on the printer.
Page 60 shows you different error messages, what they mean and how to fix it. It means you have to take out the pcu and reseat it into the printer, it is not in correctly.
Page 29 shows you how to do this. It has pictures of how to take out the pcu and put it in correctly.
I hope you get it fixed.
on Apr 12, 2019
Why does error sc486 power off/on occur when printing
Something inside printer is blocked. There is a magnetic clutch that sometimes could be a reason. Check that Waste Toner bottle is not full because in that case many bad things can happened.
I can tell you this for sure:
it's time to replace the printer with new one!!!
Maybe you will be able to buy cheep SPC410, SPC420. They are perfect
on Sep 22, 2014
Error message for Ricoh C410DN
When that message is displayed, the printer thinks the output tray is full of paper and it won't print any more because there is no room left to spit pages out. If the output tray isn't full of paper, the sensor that detects paper there might just be dirty or dusty.
That sensor is a black sensor that should be located just at the point where the paper exits the machine, above where the paper comes out. Blow some compressed air on the sensor to try to clean it off and see if that clears your error message.
on Sep 17, 2014
Not finding what you are looking for?