20 Most Recent Ricoh ISO1 400DPI Flatbed Scanner Questions & Answers


Microsoft drivers and installers have changed over time. The ISO1 drivers for XP are available here: http://www.ricoh-usa.com/downloads/downloads.asp?tsn=Ricoh-USA&path=http://support.ricoh.com/bb/html/dr_ut_e/rc2/model/is01/is01en.htm . Click on the down arrow to download the one for XP and then double click on the exe file.

I hope this helps.

Cindy Wells
(NT or Win2K drivers can work under XP at times; Win95 drivers are less likely to work even in the compatibility mode.)

Ricoh ISO1... | Answered on Nov 25, 2010


need need new tires in tray 1

Ricoh Office... | Answered on Jan 06, 2020


SC-990 - Communication problem between BICU and input output board or software performance error.

I would suggest contacting Ricoh customer service.

Ricoh Office... | Answered on Dec 27, 2019


From things I have read about this error code, it could be happening because of using compatible sublimation inks which is causing this problem.
Check out the following link:
https://www.dyesubforum.co.uk/vbforum/archive/index.php/t-13457.html

Ricoh Office... | Answered on Dec 27, 2019


Try replacing the power cable that goes from the wall to the machine.The type of power cable used in the MP C3000 & C4500 has a hard plastic insert where it plugs into the machine that can get damaged by impact and short out. Also try checking the wall socket to verify that it is completely plugged in.
Worse case scenario it could be an I/O board.
If you have a contract with Ricoh, I would suggest placing a service call for them to come out and look at the machine.

Ricoh Office... | Answered on Dec 27, 2019


This is most likely a fuser issue. If you have a spare laying around, I would suggest replacing your fuser. If you have a contract with Ricoh, I would suggest placing a service call for them to come out and look at the machine.

Ricoh Office... | Answered on Dec 27, 2019


What you are looking for is the Ring Count Delay.

Unfortunately it looks as though this is not an option for this unit.
Here is the manual for the MP C4501.
http://support.ricoh.com/bb_v1oi/html/oi/re/model/mpc41/mpc41en.htm

If you need a service manual.
https://www.service-manual.net/?download=53457-ricoh-aficio-mpc4501-aficio-mpc5501-series-service-manual

Ricoh Office... | Answered on Dec 27, 2019


need to repair or replace fuser then reset code

Ricoh Office... | Answered on Dec 25, 2019


Just keep using it.

How to Reset a Ricoh to Factory Settings ' It Still Works


https://itstillworks.com > Hardware

Press the "./*" key and the "#" key on the Ricoh copier at the same time and hold for 10 seconds. Nothing will seem to happen until you hold both buttons down for the full 10 seconds. Once 10 seconds is reached, the copier will shut down and begin to re-boot.

Ricoh Office... | Answered on Dec 24, 2019


facebook da rahey erorr occread

Ricoh Office... | Answered on Dec 24, 2019

Not finding what you are looking for?
Ricoh ISO1 400DPI Flatbed Scanner Logo

2 questions posted

Ask a Question

Usually answered in minutes!

Top Ricoh Office Equipment & Supplies Experts

Adorjani Laszlo

Level 3 Expert

1316 Answers

quennie732

Level 2 Expert

422 Answers

Bernard D'Souza

Level 2 Expert

163 Answers

Are you a Ricoh Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

IS Ricoh

  • IS Ricoh

Most Popular Question

get ricoh

  • Office Equipment & Supplies
Loading...